[PATCH] mailbox: mtk-cmdq: fix gce timeout issue
Hsin-Yi Wang
hsinyi at chromium.org
Mon Sep 26 01:54:36 PDT 2022
On Mon, Sep 26, 2022 at 4:35 PM Yongqiang Niu
<yongqiang.niu at mediatek.com> wrote:
>
Please include v3 in the title and add change logs next time.
> 1. enable gce ddr enable(gce reigster offset 0x48, bit 16 to 18) when gce work,
> and disable gce ddr enable when gce work job done
> 2. split cmdq clk enable/disable api, and control gce ddr enable/disable
> in clk enable/disable function to make sure it could protect when cmdq
> is multiple used by display and mdp
>
> this is only for some SOC which has flag "control_by_sw".
> for this kind of gce, there is a handshake flow between gce and ddr
> hardware,
> if not set ddr enable flag of gce, ddr will fall into idle mode,
> then gce instructions will not process done.
> we need set this flag of gce to tell ddr when gce is idle or busy
> controlled by software flow.
>
> ddr problem is a special case.
> when test suspend/resume case, gce sometimes will pull ddr, and ddr can
> not go to suspend.
> if we set gce register 0x48 to 0x7, will fix this gce pull ddr issue,
> as you have referred [1] and [2] (8192 and 8195)
> but for mt8186, the gce is more special, except setting of [1] and [2],
> we need add more setting set gce register 0x48 to (0x7 << 16 | 0x7)
> when gce working to make sure gce could process all instructions ok.
> this case just need normal bootup, if we not set this, display cmdq
> task will timeout, and chrome homescreen will always black screen.
>
> and with this patch, we have done these test on mt8186:
> 1.suspend/resume
> 2.boot up to home screen
> 3.playback video with youtube.
>
> suspend issue is special gce hardware issue, gce client driver
> command already process done, but gce still pull ddr.
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
> drivers/mailbox/mtk-cmdq-mailbox.c | 68 +++++++++++++++++++++++++++---
> 1 file changed, 63 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 9465f9081515..bd63773b05fd 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -38,6 +38,8 @@
> #define CMDQ_THR_PRIORITY 0x40
>
> #define GCE_GCTL_VALUE 0x48
> +#define GCE_CTRL_BY_SW GENMASK(18, 16)
> +#define GCE_DDR_EN GENMASK(2, 0)
>
> #define CMDQ_THR_ACTIVE_SLOT_CYCLES 0x3200
> #define CMDQ_THR_ENABLED 0x1
> @@ -80,16 +82,60 @@ struct cmdq {
> bool suspended;
> u8 shift_pa;
> bool control_by_sw;
> + bool sw_ddr_en;
> u32 gce_num;
> + atomic_t usage;
> + spinlock_t lock;
> };
>
> struct gce_plat {
> u32 thread_nr;
> u8 shift;
> bool control_by_sw;
> + bool sw_ddr_en;
> u32 gce_num;
> };
>
> +static s32 cmdq_clk_enable(struct cmdq *cmdq)
> +{
> + s32 usage, ret;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&cmdq->lock, flags);
> +
> + usage = atomic_inc_return(&cmdq->usage);
> +
> + ret = clk_bulk_enable(cmdq->gce_num, cmdq->clocks);
> + if (usage <= 0 || ret < 0) {
> + dev_err(cmdq->mbox.dev, "ref count %d ret %d suspend %d\n",
> + usage, ret, cmdq->suspended);
> + } else if (usage == 1) {
> + if (cmdq->sw_ddr_en)
> + writel(GCE_DDR_EN + GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);
> + }
> +
> + spin_unlock_irqrestore(&cmdq->lock, flags);
> +
> + return ret;
> +}
> +
> +static void cmdq_clk_disable(struct cmdq *cmdq)
> +{
> + s32 usage;
> +
> + usage = atomic_dec_return(&cmdq->usage);
> +
> + if (usage < 0) {
> + dev_err(cmdq->mbox.dev, "ref count %d suspend %d\n",
> + usage, cmdq->suspended);
> + } else if (usage == 0) {
> + if (cmdq->sw_ddr_en)
> + writel(GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);
> + }
> +
> + clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +}
> +
> u8 cmdq_get_shift_pa(struct mbox_chan *chan)
> {
> struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox);
> @@ -266,7 +312,8 @@ static void cmdq_thread_irq_handler(struct cmdq *cmdq,
>
> if (list_empty(&thread->task_busy_list)) {
> cmdq_thread_disable(cmdq, thread);
> - clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +
> + cmdq_clk_disable(cmdq);
> }
> }
>
> @@ -355,8 +402,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
> task->pkt = pkt;
>
> if (list_empty(&thread->task_busy_list)) {
> - WARN_ON(clk_bulk_enable(cmdq->gce_num, cmdq->clocks));
> -
> + WARN_ON(cmdq_clk_enable(cmdq) < 0);
> /*
> * The thread reset will clear thread related register to 0,
> * including pc, end, priority, irq, suspend and enable. Thus
> @@ -428,7 +474,7 @@ static void cmdq_mbox_shutdown(struct mbox_chan *chan)
> }
>
> cmdq_thread_disable(cmdq, thread);
> - clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> + cmdq_clk_disable(cmdq);
>
> done:
> /*
> @@ -468,7 +514,8 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
>
> cmdq_thread_resume(thread);
> cmdq_thread_disable(cmdq, thread);
> - clk_bulk_disable(cmdq->gce_num, cmdq->clocks);
> +
> + cmdq_clk_disable(cmdq);
>
> out:
> spin_unlock_irqrestore(&thread->chan->lock, flags);
> @@ -543,6 +590,7 @@ static int cmdq_probe(struct platform_device *pdev)
> cmdq->thread_nr = plat_data->thread_nr;
> cmdq->shift_pa = plat_data->shift;
> cmdq->control_by_sw = plat_data->control_by_sw;
> + cmdq->sw_ddr_en = plat_data->sw_ddr_en;
> cmdq->gce_num = plat_data->gce_num;
> cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
> err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
> @@ -615,6 +663,7 @@ static int cmdq_probe(struct platform_device *pdev)
>
> WARN_ON(clk_bulk_prepare(cmdq->gce_num, cmdq->clocks));
>
> + spin_lock_init(&cmdq->lock);
> cmdq_init(cmdq);
>
> return 0;
> @@ -660,9 +709,18 @@ static const struct gce_plat gce_plat_v6 = {
> .gce_num = 2
> };
>
> +static const struct gce_plat gce_plat_v7 = {
> + .thread_nr = 24,
> + .shift = 3,
> + .control_by_sw = true,
> + .sw_ddr_en = true,
> + .gce_num = 1
> +};
> +
> static const struct of_device_id cmdq_of_ids[] = {
> {.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2},
> {.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3},
> + {.compatible = "mediatek,mt8186-gce", .data = (void *)&gce_plat_v7},
> {.compatible = "mediatek,mt6779-gce", .data = (void *)&gce_plat_v4},
> {.compatible = "mediatek,mt8192-gce", .data = (void *)&gce_plat_v5},
> {.compatible = "mediatek,mt8195-gce", .data = (void *)&gce_plat_v6},
> --
> 2.25.1
>
More information about the linux-arm-kernel
mailing list