[PATCH v2] arm64: dts: rockchip: fix quartz64-a bluetooth configuration

[Peter Geis]

On Sun, Sep 25, 2022 at 8:48 AM Lev Popov <leo at nabam.net> wrote:
>
> For "Quartz64 Model A" add missing RTS line to the UART interface used by
> bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
> match the boards physical layout. This changes are necessary to make
> bluetooth provided by the wireless module work.
>
> Fixes:  cd414d5ac1fdeecf0617737e688a1af00858253a (arm64: dts: rockchip: rename Quartz64-A bluetooth gpios)

Good Evening,

That patch only renamed the lines to comply with the dt-bindings, the
correct patch is the one that introduced the original line layout:
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64
Quartz64-A")

Very Respectfully,
Peter

>
> Signed-off-by: Lev Popov <leo at nabam.net>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> index a05460b92415..91908081c5ed 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> @@ -740,7 +740,7 @@ &uart0 {
>
>  &uart1 {
>         pinctrl-names = "default";
> -       pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
> +       pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
>         status = "okay";
>         uart-has-rtscts;
>
> @@ -748,8 +748,8 @@ bluetooth {
>                 compatible = "brcm,bcm43438-bt";
>                 clocks = <&rk817 1>;
>                 clock-names = "lpo";
> -               device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> -               host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> +               host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> +               device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
>                 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
> --
> 2.37.3
>