[PATCH v6 2/7] ARM: dts: sun8i: v3s: Add mbus node to represent the interconnect

Paul Kocialkowski paul.kocialkowski at bootlin.com
Sat Sep 24 08:28:15 PDT 2022


The V3s uses the mbus interconnect to provide DRAM access for a
number of blocks. The SoC can only map 2 GiB of DRAM, which is
reflected in the dma-ranges property.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
Reviewed-by: Samuel Holland <samuel at sholland.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index db194c606fdc..34f7df6b3960 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -579,6 +579,21 @@ int_mii_phy: ethernet-phy at 1 {
 			};
 		};
 
+		mbus: dram-controller at 1c62000 {
+			compatible = "allwinner,sun8i-v3s-mbus";
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
 		spi0: spi at 1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
-- 
2.37.3




More information about the linux-arm-kernel mailing list