[PATCH v5 0/3] Add dtsi for sc7280 boards that using rt5682

[Doug Anderson]

Hi,

On Fri, Sep 23, 2022 at 7:09 AM Judy Hsiao <judyhsiao at chromium.org> wrote:
>
> Put sound node and lpass_cpu node settings for boards that use rt5682
> codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
> choices of headset codec for herobrine projects. Common audio setting
> for the internal speaker is in sc7280-herobrine.dtsi.
>
> Change Since V4
> - Rebase and include sc7280-herobrine-villager-r0.dts change.
>
> Changes Since V3:
> - Remove Change-Id in the commit message.
> - Add dependency in cover letter.
>
> Changes Since V2:
> - Fix sc7280-herobrine-audio-rt5682.dtsi syntax.
>
> Changes Since V1:
> - Not to include the herobrine-villager-r0.dts changes in this patch
>   series to avoid conflict.
>
> Judy Hsiao (3):
>   arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
>   arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
>   arm64: dts: qcom: sc7280: Include sc7280-herobrine-audio-rt5682.dtsi
>     in herobrine-r1 and villager-r0
>
>  .../qcom/sc7280-herobrine-audio-rt5682.dtsi   | 122 ++++++++++++++++++
>  .../qcom/sc7280-herobrine-herobrine-r1.dts    |   1 +
>  .../dts/qcom/sc7280-herobrine-villager-r0.dts |   1 +
>  .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  30 +++++
>  4 files changed, 154 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi

Please sync the Qualcomm tree upstream. I can tell you didn't since
you had the wrong email address for Bjorn. Mailmap should have
converted it to the kernel.org one.

In any case, with the correct address for Bjorn, I'd note that I think
this patch series is ready to land if you're planning a 2nd pull
request this cycle.

-Doug