[PATCH] ARM: dts: integrator: Fix DMA ranges

[Linus Walleij]

A recent change affecting the behaviour of phys_to_dma() to
actually require the device tree ranges to work unmasked a
bug in the Integrator DMA ranges.

The PL110 uses the CMA allocator to obtain coherent allocations
from a dedicated 1MB video memory, leading to the following
call chain:

drm_gem_cma_create()
  dma_alloc_attrs()
    dma_alloc_from_dev_coherent()
      __dma_alloc_from_coherent()
        dma_get_device_base()
          phys_to_dma()
            translate_phys_to_dma()

phys_to_dma() by way of translate_phys_to_dma() will nowadays not
provide 1:1 mappings unless the ranges are properly defined in
the device tree and reflected into the dev->dma_range_map.

There is a bug in the device trees because the DMA ranges are
incorrectly specified, and the patch uncovers this bug.

Solution:

- Fix the LB (logic bus) ranges to be 1-to-1 like they should
  have always been.
- Provide a 1:1 dma-ranges attribute to the PL110.
- Mark the PL110 display controller as DMA coherent.

This makes the DMA ranges work right and makes the PL110
framebuffer work again.

Cc: Christoph Hellwig <hch at lst.de>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: stable at vger.kernel.org
Fixes: ae626eb97376 ("ARM/dma-mapping: use dma-direct unconditionally")
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
SoC folks: please apply this directly for fixes if it seems
to be the right thing to do.
---
 arch/arm/boot/dts/integratorap-im-pd1.dts | 2 ++
 arch/arm/boot/dts/integratorap.dts        | 8 ++++----
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index 31724753d3f3..ecccbd1777a3 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -248,6 +248,8 @@ display at 1000000 {
 		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
 		max-memory-bandwidth = <40000000>;
 		memory-region = <&impd1_ram>;
+		dma-ranges;
+		dma-coherent;
 
 		port at 0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index c983435ed492..9148287fa0a9 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -262,7 +262,7 @@ bus at c0000000 {
 		lm0: bus at c0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xc0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
 			reg = <0xc0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -270,7 +270,7 @@ lm0: bus at c0000000 {
 		lm1: bus at d0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xd0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
 			reg = <0xd0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -278,7 +278,7 @@ lm1: bus at d0000000 {
 		lm2: bus at e0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xe0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
 			reg = <0xe0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -286,7 +286,7 @@ lm2: bus at e0000000 {
 		lm3: bus at f0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xf0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
 			reg = <0xf0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-- 
2.37.3