[PATCH v9,2/3] drm: mediatek: Set dpi format in mmsys
xinlei.lee at mediatek.com
xinlei.lee at mediatek.com
Fri Sep 23 01:40:39 PDT 2022
From: Xinlei Lee <xinlei.lee at mediatek.com>
Due to the mt8186 hardware changes, we need to modify the dpi output
format corresponding to the mmsys register(mmsys_base+0x400).
Co-developed-by: Jitao Shi <jitao.shi at mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 630a4e301ef6..bd1870a8504a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -15,6 +15,7 @@
#include <linux/of_graph.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/soc/mediatek/mtk-mmsys.h>
#include <linux/types.h>
#include <video/videomode.h>
@@ -30,6 +31,7 @@
#include "mtk_disp_drv.h"
#include "mtk_dpi_regs.h"
#include "mtk_drm_ddp_comp.h"
+#include "mtk_drm_drv.h"
enum mtk_dpi_out_bit_num {
MTK_DPI_OUT_BIT_NUM_8BITS,
@@ -82,6 +84,7 @@ struct mtk_dpi {
struct pinctrl_state *pins_dpi;
u32 output_fmt;
int refcount;
+ struct device *mmsys_dev;
};
static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
@@ -135,6 +138,7 @@ struct mtk_dpi_yc_limit {
* @yuv422_en_bit: Enable bit of yuv422.
* @csc_enable_bit: Enable bit of CSC.
* @pixels_per_iter: Quantity of transferred pixels per iteration.
+ * @edge_cfg_in_mmsys: If the edge configuration for DPI's output needs to be set in MMSYS.
*/
struct mtk_dpi_conf {
unsigned int (*cal_factor)(int clock);
@@ -153,6 +157,7 @@ struct mtk_dpi_conf {
u32 yuv422_en_bit;
u32 csc_enable_bit;
u32 pixels_per_iter;
+ bool edge_cfg_in_mmsys;
};
static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -449,8 +454,12 @@ static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE ?
EDGE_SEL : 0, EDGE_SEL);
+ if (dpi->conf->edge_cfg_in_mmsys)
+ mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev, MTK_DPI_RGB888_DDR_CON);
} else {
mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, 0);
+ if (dpi->conf->edge_cfg_in_mmsys)
+ mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev, MTK_DPI_RGB888_SDR_CON);
}
}
@@ -778,8 +787,10 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
{
struct mtk_dpi *dpi = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
+ struct mtk_drm_private *priv = drm_dev->dev_private;
int ret;
+ dpi->mmsys_dev = priv->mmsys_dev;
ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
DRM_MODE_ENCODER_TMDS);
if (ret) {
--
2.18.0
More information about the linux-arm-kernel
mailing list