[PATCH v7 1/4] ARM: dts: qcom: Use new compatibles for crypto nodes

Bhupesh Sharma bhupesh.sharma at linaro.org
Tue Sep 20 21:55:59 PDT 2022


Since we are using soc specific qce crypto IP compatibles
in the bindings now, use the same in the device tree files
which include the crypto nodes.

Cc: Bjorn Andersson <andersson at kernel.org>
Cc: Rob Herring <robh at kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi   | 2 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi  | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b23591110bd2..9c40714562d5 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -314,7 +314,7 @@ cryptobam: dma-controller at 8e04000 {
 		};
 
 		crypto: crypto at 8e3a000 {
-			compatible = "qcom,crypto-v5.1";
+			compatible = "qcom,ipq4019-qce";
 			reg = <0x08e3a000 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 				 <&gcc GCC_CRYPTO_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index a7c7ca980a71..0ae3c601b279 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -198,7 +198,7 @@ cryptobam: dma-controller at 704000 {
 		};
 
 		crypto: crypto at 73a000 {
-			compatible = "qcom,crypto-v5.1";
+			compatible = "qcom,ipq6018-qce";
 			reg = <0x0 0x0073a000 0x0 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 				<&gcc GCC_CRYPTO_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a47acf9bdf24..0683ef931413 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -286,7 +286,7 @@ cryptobam: dma-controller at 704000 {
 		};
 
 		crypto: crypto at 73a000 {
-			compatible = "qcom,crypto-v5.1";
+			compatible = "qcom,ipq8074-qce";
 			reg = <0x0073a000 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 				 <&gcc GCC_CRYPTO_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c0a2baffa49d..0dd6e1fea99c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -755,7 +755,7 @@ cryptobam: dma-controller at 644000 {
 		};
 
 		crypto: crypto at 67a000 {
-			compatible = "qcom,crypto-v5.4";
+			compatible = "qcom,msm8996-qce";
 			reg = <0x0067a000 0x6000>;
 			clocks = <&gcc GCC_CE1_AHB_CLK>,
 				 <&gcc GCC_CE1_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d761da47220d..4aa5a82bd265 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2566,7 +2566,7 @@ cryptobam: dma-controller at 1dc4000 {
 		};
 
 		crypto: crypto at 1dfa000 {
-			compatible = "qcom,crypto-v5.4";
+			compatible = "qcom,sdm845-qce";
 			reg = <0 0x01dfa000 0 0x6000>;
 			clocks = <&gcc GCC_CE1_AHB_CLK>,
 				 <&gcc GCC_CE1_AXI_CLK>,
-- 
2.37.1




More information about the linux-arm-kernel mailing list