[PATCH] ARM: dts: aspeed: Add AMD DaytonaX BMC
Konstantin Aladyshev
aladyshev22 at gmail.com
Tue Sep 20 08:34:07 PDT 2022
Add initial version of device tree for the BMC in the AMD DaytonaX
platform.
AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22 at gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts | 320 ++++++++++++++++++
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 14 +-
3 files changed, 333 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..9eff88d410aa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1575,6 +1575,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2600-evb-a1.dtb \
aspeed-ast2600-evb.dtb \
aspeed-bmc-amd-ethanolx.dtb \
+ aspeed-bmc-amd-daytonax.dtb \
aspeed-bmc-ampere-mtjade.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..0e066b5ae0fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "AMD DaytonaX BMC";
+ compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlycon";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+ <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ #include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+ //Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart5 {
+ //BMC Console
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+ aspeed,lpc-io-reg = <0x3f8>;
+ aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "","","led-fault","led-identify","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "id-button","","","","","","","",
+ /*D0-D7*/ "","","ASSERT_BMC_READY","","","","","",
+ /*E0-E7*/ "reset-button","reset-control","power-button","power-control","",
+ "power-good","power-ok","",
+ /*F0-F7*/ "","","","","","","BATTERY_DETECT","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","",
+ /*AA0-AA7*/ "","","","","","","","",
+ /*AB0-AB7*/ "FM_BMC_READ_SPD_TEMP","","","","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default
+ &pinctrl_pwm7_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan at 1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan at 2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan at 4 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan at 5 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan at 6 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan at 7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan at 8 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan at 9 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan at 10 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan at 11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan at 12 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan at 13 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan at 14 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+
+ fan at 15 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+ };
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
index 6406a0f080ee..90feac5ec628 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -5,6 +5,7 @@
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "AMD EthanolX BMC";
@@ -58,6 +59,7 @@ &fmc {
flash at 0 {
status = "okay";
m25p,fast-read;
+ label = "bmc";
#include "openbmc-flash-layout.dtsi"
};
};
@@ -78,7 +80,9 @@ &uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
- &pinctrl_rxd1_default>;
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ncts1_default>;
};
&uart5 {
@@ -160,7 +164,7 @@ &i2c2 {
&i2c3 {
status = "okay";
eeprom at 50 {
- compatible = "atmel,24c256";
+ compatible = "atmel,24c128";
reg = <0x50>;
pagesize = <64>;
};
@@ -261,6 +265,12 @@ &lpc_ctrl {
status = "okay";
};
+&vuart {
+ status = "okay";
+ aspeed,lpc-io-reg = <0x3f8>;
+ aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
--
2.25.1
More information about the linux-arm-kernel
mailing list