[PATCH] greatlakes: dts: Add Facebook greatlakes (AST2600) BMC
Bonnie Lo/WYHQ/Wiwynn
Bonnie_Lo at wiwynn.com
Tue Sep 20 00:45:52 PDT 2022
Hi Krzysztof,
I revise the device tree as following and resend the mail.
It create a new mail thread " [PATCH] ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC".
Kindly to correct me, if there is any problem.
> Use subject prefixes matching the subsystem (git log --oneline -- ...).
>
> >
> > Add linux device tree entry related to greatlakes specific devices
> > connected to BMC SoC.
>
> Please wrap commit message according to Linux coding style / submission
> process:
> https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Felixir.b
> ootlin.com%2Flinux%2Fv5.18-rc4%2Fsource%2FDocumentation%2Fprocess%2
> Fsubmitting-patches.rst%23L586&data=05%7C01%7CBonnie_Lo%40wiw
> ynn.com%7C1dee8dcb540a49522fb608da98cdba6f%7Cda6e0628fc834caf9dd
> 273061cbab167%7C0%7C0%7C637990306620286314%7CUnknown%7CTWFp
> bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI
> 6Mn0%3D%7C3000%7C%7C%7C&sdata=mC2E3dJbuYgXklS%2Fw8s2w%2
> BKH%2BZ3CsZSndFTgPBjyvpw%3D&reserved=0
>
I have add " ARM: dts: aspeed: greatlakes:".
> >
> > Signed-off-by: Bonnie Lo <Bonnie_Lo at wiwynn.com>
> > ---
> > arch/arm/boot/dts/Makefile | 1 +
> > .../dts/aspeed-bmc-facebook-greatlakes.dts | 248
> ++++++++++++++++++
>
> Missing documentation of board compatible (bindings) as first patch.
>
> > 2 files changed, 249 insertions(+)
> > create mode 100644
> > arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 05d8aef6e5d2..40fa906ab17f 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1580,6 +1580,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> > aspeed-bmc-asrock-e3c246d4i.dtb \
> > aspeed-bmc-asrock-romed8hm3.dtb \
> > aspeed-bmc-bytedance-g220a.dtb \
> > + aspeed-bmc-facebook-greatlakes.dtb \
>
> Wrong order.
I have reordered it.
>
> > aspeed-bmc-facebook-bletchley.dtb \
> > aspeed-bmc-facebook-cloudripper.dtb \
> > aspeed-bmc-facebook-cmm.dtb \
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> > b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> > new file mode 100644
> > index 000000000000..f011cc4d370f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
> > @@ -0,0 +1,248 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later // Copyright 2022
> > +Facebook Inc.
> > +
> > +/dts-v1/;
> > +#include "aspeed-g6.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h> #include
> > +<dt-bindings/i2c/i2c.h> #include <dt-bindings/leds/leds-pca955x.h>
> > +
> > +/ {
> > + model = "AST2600 EVB";
>
> Wrong name.
I have revies the model name " Facebook Greatlakes BMC ".
>
> > + compatible = "aspeed,ast2600";
>
> Missing board compatible.
>
I add board compatible " facebook,greatlakes-bmc"
> > +
> > + aliases {
> > + serial4 = &uart5;
> > + };
> > +
> > + chosen {
> > + stdout-path = &uart5;
> > + bootargs = "console=ttyS4,57600n8 root=/dev/ram rw
> > + vmalloc=384M";
>
> Bootargs usually do not belong to mainline DTS.
Removed.
>
> > + };
> > +
> > + memory at 80000000 {
> > + device_type = "memory";
> > + reg = <0x80000000 0x80000000>;
> > + };
> > +
> > + iio-hwmon {
> > + compatible = "iio-hwmon";
> > + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>,
> <&adc0 3>,
> > + <&adc0 4>, <&adc0 5>, <&adc0 6>,
> <&adc0 7>,
> > + <&adc1 0>, <&adc1 2>, <&adc1 3>,
> <&adc1 4>,
> > + <&adc1 5>, <&adc1 6>;
> > + };
> > +};
> > +
> > +&uart1 {
> > + status = "okay";
> > +};
> > +
> > +&uart2 {
> > + status = "okay";
> > +};
> > +
> > +&uart3 {
> > + status = "okay";
> > +};
> > +
> > +&uart4 {
> > + status = "okay";
> > +};
> > +
> > +&uart5 {
> > + status = "okay";
> > +};
> > +
> > +&wdt1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> > + aspeed,reset-type = "soc";
> > + aspeed,external-signal;
> > + aspeed,ext-push-pull;
> > + aspeed,ext-active-high;
> > + aspeed,ext-pulse-duration = <256>; };
> > +
> > +&mac3 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rmii4_default>;
> > + no-hw-checksum;
> > + use-ncsi;
> > + mlx,multi-host;
> > + ncsi-ctrl,start-redo-probe;
> > + ncsi-ctrl,no-channel-monitor;
> > + ncsi-package = <1>;
> > + ncsi-channel = <1>;
> > + ncsi-rexmit = <1>;
> > + ncsi-timeout = <2>;
> > +};
> > +
> > +&rtc {
> > + status = "okay";
> > +};
> > +
> > +&fmc {
> > + status = "okay";
> > + flash at 0 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bmc";
> > + spi-rx-bus-width = <4>;
> > + spi-max-frequency = <50000000>; #include
> > +"openbmc-flash-layout-64.dtsi"
> > + };
> > + flash at 1 {
> > + status = "okay";
> > + m25p,fast-read;
> > + label = "bmc2";
> > + spi-rx-bus-width = <4>;
> > + spi-max-frequency = <50000000>;
> > + };
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > + multi-master;
> > + ipmb0 at 10 {
> > + compatible = "ipmb-dev";
> > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> > + i2c-protocol;
> > + };
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > + multi-master;
> > + ipmb1 at 10 {
> > + compatible = "ipmb-dev";
> > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> > + i2c-protocol;
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > + multi-master;
> > + ipmb2 at 10 {
> > + compatible = "ipmb-dev";
> > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> > + i2c-protocol;
> > + };
> > +};
> > +
> > +&i2c3 {
> > + status = "okay";
> > + multi-master;
> > + ipmb3 at 10 {
> > + compatible = "ipmb-dev";
> > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> > + i2c-protocol;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + status = "okay";
> > +};
> > +
> > +&i2c5 {
> > + status = "okay";
> > +};
> > +
> > +&i2c6 {
> > + status = "okay";
> > +};
> > +
> > +&i2c7 {
> > + status = "okay";
> > +};
> > +
> > +&i2c8 {
> > + status = "okay";
> > + tmp421 at 1f {
>
> Node names should be generic.
> https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdevicet
> ree-specification.readthedocs.io%2Fen%2Flatest%2Fchapter2-devicetree-basi
> cs.html%23generic-names-recommendation&data=05%7C01%7CBonnie
> _Lo%40wiwynn.com%7C1dee8dcb540a49522fb608da98cdba6f%7Cda6e0628f
> c834caf9dd273061cbab167%7C0%7C0%7C637990306620286314%7CUnknow
> n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha
> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=AjWYGYl6zCyNq5Yd
> 6VOui9P40Kdz3boxK1LSNSy%2Bcmw%3D&reserved=0
>
Revise as "temperature-sensor".
> > + compatible = "ti,tmp421";
> > + reg = <0x1f>;
> > + };
> > + // NIC EEPROM
> > + eeprom at 50 {
> > + compatible = "st,24c32";
> > + reg = <0x50>;
> > + };
> > +};
> > +
> > +&i2c9 {
> > + status = "okay";
> > + multi-master;
> > + ipmb9 at 10 {
> > + compatible = "ipmb-dev";
> > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> > + i2c-protocol;
> > + };
> > +};
> > +
> > +&i2c10 {
> > + status = "okay";
> > +};
> > +
> > +&i2c11 {
> > + status = "okay";
> > + eeprom at 51 {
> > + compatible = "atmel,24c128";
> > + reg = <0x51>;
> > + };
> > + eeprom at 54 {
> > + compatible = "atmel,24c128";
> > + reg = <0x54>;
> > + };
> > +};
> > +
> > +&i2c12 {
> > + status = "okay";
> > + lm75 at 4f {
>
> Node names should be generic.
> https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdevicet
> ree-specification.readthedocs.io%2Fen%2Flatest%2Fchapter2-devicetree-basi
> cs.html%23generic-names-recommendation&data=05%7C01%7CBonnie
> _Lo%40wiwynn.com%7C1dee8dcb540a49522fb608da98cdba6f%7Cda6e0628f
> c834caf9dd273061cbab167%7C0%7C0%7C637990306620286314%7CUnknow
> n%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha
> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=AjWYGYl6zCyNq5Yd
> 6VOui9P40Kdz3boxK1LSNSy%2Bcmw%3D&reserved=0
>
Revise as "temperature-sensor".
> > + compatible = "lm75";
> > + reg = <0x4f>;
> > + };
> > +};
> > +
>
> (...)
>
> > +
> > +&gpio0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
> > +};
> > +
> > +
> > --
> > 2.17.1
> >
> > WIWYNN PROPRIETARY This email (and any attachments) contains
> proprietary or confidential information and is for the sole use of its intended
> recipient. Any unauthorized review, use, copying or distribution of this email
> or the content of this email is strictly prohibited. If you are not the intended
> recipient, please notify the sender and delete this email immediately.
>
> This means we cannot take this patch. Proprietary and/or confidential
> patches cannot be merged.
>
> Please license the patch as you wrote in SPDX header.
>
> Best regards,
> Krzysztof
WIWYNN PROPRIETARY
This email (and any attachments) contains proprietary or confidential information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, please notify the sender and delete this email immediately.
More information about the linux-arm-kernel
mailing list