[PATCH] ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC
Bonnie Lo
Bonnie_Lo at Wiwynn.com
Mon Sep 19 19:30:34 PDT 2022
From: Bonnie Lo <Bonnie_Lo at wiwynn.com>
Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.
Signed-off-by: Bonnie Lo <Bonnie_Lo at wiwynn.com>
---
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-facebook-greatlakes.dts | 247 ++++++++++++++++++
2 files changed, 248 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..d9f417f2d7df 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1586,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
+ aspeed-bmc-facebook-greatlakes.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..c368eb33efeb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Greatlakes BMC";
+ compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ bootargs = "console=ttyS4,57600n8";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+ <&adc1 5>, <&adc1 6>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ no-hw-checksum;
+ use-ncsi;
+ mlx,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
+ ncsi-package = <1>;
+ ncsi-channel = <1>;
+ ncsi-rexmit = <1>;
+ ncsi-timeout = <2>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+ flash at 1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc2";
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ multi-master;
+ ipmb0 at 10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ multi-master;
+ ipmb1 at 10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ multi-master;
+ ipmb2 at 10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ multi-master;
+ ipmb3 at 10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ // NIC EEPROM
+ eeprom at 50 {
+ compatible = "st,24c32";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ multi-master;
+ ipmb9 at 10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+ eeprom at 51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+ eeprom at 54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ temperature-sensor at 4f {
+ compatible = "lm75";
+ reg = <0x4f>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&adc0 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ ref_voltage = <2500>;
+ status = "okay";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default
+ &pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+};
+
+
--
2.17.1
WIWYNN PROPRIETARY
This email (and any attachments) contains proprietary or confidential information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited. If you are not the intended recipient, please notify the sender and delete this email immediately.
More information about the linux-arm-kernel
mailing list