[PATCH 2/2] media: i2c: s5k6a3: switch to using gpiod API

[Marek Szyprowski]

Hi,

On 13.09.2022 18:41, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes one of the last uses of of_get_gpio_flags().
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>

Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>

Thanks!

> ---
>   drivers/media/i2c/s5k6a3.c | 30 +++++++++++-------------------
>   1 file changed, 11 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
> index a4efd6d10b43..ef6673b10580 100644
> --- a/drivers/media/i2c/s5k6a3.c
> +++ b/drivers/media/i2c/s5k6a3.c
> @@ -9,12 +9,12 @@
>   #include <linux/clk.h>
>   #include <linux/delay.h>
>   #include <linux/device.h>
> +#include <linux/err.h>
>   #include <linux/errno.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>   #include <linux/i2c.h>
>   #include <linux/kernel.h>
>   #include <linux/module.h>
> -#include <linux/of_gpio.h>
>   #include <linux/pm_runtime.h>
>   #include <linux/regulator/consumer.h>
>   #include <linux/slab.h>
> @@ -59,7 +59,7 @@ struct s5k6a3 {
>   	struct v4l2_subdev subdev;
>   	struct media_pad pad;
>   	struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES];
> -	int gpio_reset;
> +	struct gpio_desc *gpio_reset;
>   	struct mutex lock;
>   	struct v4l2_mbus_framefmt format;
>   	struct clk *clock;
> @@ -216,11 +216,11 @@ static int __s5k6a3_power_on(struct s5k6a3 *sensor)
>   			goto error_clk;
>   	}
>   
> -	gpio_set_value(sensor->gpio_reset, 1);
> +	gpiod_set_value_cansleep(sensor->gpio_reset, 0);
>   	usleep_range(600, 800);
> -	gpio_set_value(sensor->gpio_reset, 0);
> +	gpiod_set_value_cansleep(sensor->gpio_reset, 1);
>   	usleep_range(600, 800);
> -	gpio_set_value(sensor->gpio_reset, 1);
> +	gpiod_set_value_cansleep(sensor->gpio_reset, 0);
>   
>   	/* Delay needed for the sensor initialization */
>   	msleep(20);
> @@ -240,7 +240,7 @@ static int __s5k6a3_power_off(struct s5k6a3 *sensor)
>   {
>   	int i;
>   
> -	gpio_set_value(sensor->gpio_reset, 0);
> +	gpiod_set_value_cansleep(sensor->gpio_reset, 1);
>   
>   	for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--)
>   		regulator_disable(sensor->supplies[i].consumer);
> @@ -285,32 +285,24 @@ static int s5k6a3_probe(struct i2c_client *client)
>   	struct device *dev = &client->dev;
>   	struct s5k6a3 *sensor;
>   	struct v4l2_subdev *sd;
> -	int gpio, i, ret;
> +	int i, ret;
>   
>   	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
>   	if (!sensor)
>   		return -ENOMEM;
>   
>   	mutex_init(&sensor->lock);
> -	sensor->gpio_reset = -EINVAL;
> -	sensor->clock = ERR_PTR(-EINVAL);
>   	sensor->dev = dev;
>   
>   	sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME);
>   	if (IS_ERR(sensor->clock))
>   		return PTR_ERR(sensor->clock);
>   
> -	gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
> -	if (!gpio_is_valid(gpio))
> -		return gpio;
> -
> -	ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
> -						S5K6A3_DRV_NAME);
> -	if (ret < 0)
> +	sensor->gpio_reset = devm_gpiod_get(dev, NULL, GPIOD_OUT_HIGH);
> +	ret = PTR_ERR_OR_ZERO(sensor->gpio_reset);
> +	if (ret)
>   		return ret;
>   
> -	sensor->gpio_reset = gpio;
> -
>   	if (of_property_read_u32(dev->of_node, "clock-frequency",
>   				 &sensor->clock_frequency)) {
>   		sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland