[PATCH] pinctrl: nomadik: remove dead code after DB8540 pinctrl removal

[Lukas Bulwahn]

Commit b6d09f780761 ("pinctrl: nomadik: Drop U8540/9540 support") removes
the DB8540 pin controller driver and its config PINCTRL_DB8540.

There is some code left-over in the generic nomadik pinctrl driver, i.e.,
drivers/pinctrl/nomadik/pinctrl-nomadik.{ch}, that is still around for the
removed DB8540 pin controller driver.

Remove this remaining dead code.

This issue was discovered with ./scripts/checkkconfigsymbols.py.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn at gmail.com>
---
 drivers/pinctrl/nomadik/pinctrl-nomadik.c |  6 ------
 drivers/pinctrl/nomadik/pinctrl-nomadik.h | 14 --------------
 2 files changed, 20 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 58c7ac8c7d4d..8fdffbb925aa 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1802,10 +1802,6 @@ static const struct of_device_id nmk_pinctrl_match[] = {
 		.compatible = "stericsson,db8500-pinctrl",
 		.data = (void *)PINCTRL_NMK_DB8500,
 	},
-	{
-		.compatible = "stericsson,db8540-pinctrl",
-		.data = (void *)PINCTRL_NMK_DB8540,
-	},
 	{},
 };
 
@@ -1856,8 +1852,6 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
 		nmk_pinctrl_stn8815_init(&npct->soc);
 	if (version == PINCTRL_NMK_DB8500)
 		nmk_pinctrl_db8500_init(&npct->soc);
-	if (version == PINCTRL_NMK_DB8540)
-		nmk_pinctrl_db8540_init(&npct->soc);
 
 	/*
 	 * Since we depend on the GPIO chips to provide clock and register base
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.h b/drivers/pinctrl/nomadik/pinctrl-nomadik.h
index 820f07f4db32..84e297757335 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.h
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.h
@@ -5,7 +5,6 @@
 /* Package definitions */
 #define PINCTRL_NMK_STN8815	0
 #define PINCTRL_NMK_DB8500	1
-#define PINCTRL_NMK_DB8540	2
 
 /* Alternate functions: function C is set in hw by setting both A and B */
 #define NMK_GPIO_ALT_GPIO	0
@@ -173,17 +172,4 @@ nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc)
 
 #endif
 
-#ifdef CONFIG_PINCTRL_DB8540
-
-void nmk_pinctrl_db8540_init(const struct nmk_pinctrl_soc_data **soc);
-
-#else
-
-static inline void
-nmk_pinctrl_db8540_init(const struct nmk_pinctrl_soc_data **soc)
-{
-}
-
-#endif
-
 #endif /* PINCTRL_PINCTRL_NOMADIK_H */
-- 
2.17.1