[PATCH v2] drm: mediatek: Fix display vblank timeout when disable dsi

Chun-Kuang Hu chunkuang.hu at kernel.org
Sat Sep 17 21:32:22 PDT 2022


Hi, Allen:

Allen-KH Cheng <allen-kh.cheng at mediatek.com> 於 2022年9月14日 週三 晚上10:00寫道:
>
> From: Xinlei Lee <xinlei.lee at mediatek.com>
>
> Dsi is turned off at bridge.disable, causing crtc to wait for vblank
> timeout. It is necessary to add count protection to turn off dsi and
> turn off at post_disable.

If turn off dsi in post_disable(), you should turn on dsi in pre_enable().

There is another patch fix this problem [1], do you have any comment
on that patch?

[1] http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html

Regards,
Chun-Kuang.

>
> Fixes: cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs")
> Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
> Co-developed-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> ---
> Change in v1:
>   * Rebase to kernel/git/chunkuang.hu/linux.git, mediatek-drm-fixes
>     [Allen-KH Cheng <allen-kh.cheng at mediatek.com>]
> ---
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 15 ++++++---------
>  1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 5b624e0f5b0a..e30f4244c001 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -768,14 +768,6 @@ static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
>         drm_display_mode_to_videomode(adjusted, &dsi->vm);
>  }
>
> -static void mtk_dsi_bridge_atomic_disable(struct drm_bridge *bridge,
> -                                         struct drm_bridge_state *old_bridge_state)
> -{
> -       struct mtk_dsi *dsi = bridge_to_dsi(bridge);
> -
> -       mtk_output_dsi_disable(dsi);
> -}
> -
>  static void mtk_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
>                                          struct drm_bridge_state *old_bridge_state)
>  {
> @@ -803,13 +795,15 @@ static void mtk_dsi_bridge_atomic_post_disable(struct drm_bridge *bridge,
>  {
>         struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>
> +       if (dsi->refcount == 1)
> +               mtk_output_dsi_disable(dsi);
> +
>         mtk_dsi_poweroff(dsi);
>  }
>
>  static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
>         .attach = mtk_dsi_bridge_attach,
>         .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> -       .atomic_disable = mtk_dsi_bridge_atomic_disable,
>         .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
>         .atomic_enable = mtk_dsi_bridge_atomic_enable,
>         .atomic_pre_enable = mtk_dsi_bridge_atomic_pre_enable,
> @@ -829,6 +823,9 @@ void mtk_dsi_ddp_stop(struct device *dev)
>  {
>         struct mtk_dsi *dsi = dev_get_drvdata(dev);
>
> +       if (dsi->refcount == 1)
> +               mtk_output_dsi_disable(dsi);
> +
>         mtk_dsi_poweroff(dsi);
>  }
>
> --
> 2.18.0
>



More information about the linux-arm-kernel mailing list