[PATCH v3 4/6] iommu: Regulate EINVAL in ->attach_dev callback functions

Nicolin Chen nicolinc at nvidia.com
Thu Sep 15 00:58:30 PDT 2022


Following the new rules in include/linux/iommu.h kdocs, EINVAL now can be
used to indicate that domain and device are incompatible by a caller that
treats it as a soft failure and tries attaching to another domain.

On the other hand, there are ->attach_dev callback functions returning it
for obvious device-specific errors. They will result in some inefficiency
in the caller handling routine.

Update these places to corresponding errnos following the new rules.

Signed-off-by: Nicolin Chen <nicolinc at nvidia.com>
---
 drivers/iommu/fsl_pamu.c        | 2 +-
 drivers/iommu/fsl_pamu_domain.c | 4 ++--
 drivers/iommu/intel/pasid.c     | 6 ++++--
 drivers/iommu/mtk_iommu.c       | 2 +-
 drivers/iommu/omap-iommu.c      | 4 ++--
 5 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index 0d03f837a5d4..2eb3211c8167 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -211,7 +211,7 @@ int pamu_config_ppaace(int liodn, u32 omi, u32 stashid, int prot)
 		ppaace->op_encode.index_ot.omi = omi;
 	} else if (~omi != 0) {
 		pr_debug("bad operation mapping index: %d\n", omi);
-		return -EINVAL;
+		return -ENODEV;
 	}
 
 	/* configure stash id */
diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
index 011f9ab7f743..b4a1c0f79c3e 100644
--- a/drivers/iommu/fsl_pamu_domain.c
+++ b/drivers/iommu/fsl_pamu_domain.c
@@ -258,7 +258,7 @@ static int fsl_pamu_attach_device(struct iommu_domain *domain,
 	liodn = of_get_property(dev->of_node, "fsl,liodn", &len);
 	if (!liodn) {
 		pr_debug("missing fsl,liodn property at %pOF\n", dev->of_node);
-		return -EINVAL;
+		return -ENODEV;
 	}
 
 	spin_lock_irqsave(&dma_domain->domain_lock, flags);
@@ -267,7 +267,7 @@ static int fsl_pamu_attach_device(struct iommu_domain *domain,
 		if (liodn[i] >= PAACE_NUMBER_ENTRIES) {
 			pr_debug("Invalid liodn %d, attach device failed for %pOF\n",
 				 liodn[i], dev->of_node);
-			ret = -EINVAL;
+			ret = -ENODEV;
 			break;
 		}
 
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index c5e7e8b020a5..4cadbd744b7f 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -101,8 +101,10 @@ int intel_pasid_alloc_table(struct device *dev)
 
 	might_sleep();
 	info = dev_iommu_priv_get(dev);
-	if (WARN_ON(!info || !dev_is_pci(dev) || info->pasid_table))
-		return -EINVAL;
+	if (WARN_ON(!info || !dev_is_pci(dev)))
+		return -ENODEV;
+	if (WARN_ON(info->pasid_table))
+		return -EBUSY;
 
 	pasid_table = kzalloc(sizeof(*pasid_table), GFP_KERNEL);
 	if (!pasid_table)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7e363b1f24df..be1a7d1cc630 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -607,7 +607,7 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
 	dom->iop = alloc_io_pgtable_ops(ARM_V7S, &dom->cfg, data);
 	if (!dom->iop) {
 		dev_err(data->dev, "Failed to alloc io pgtable\n");
-		return -EINVAL;
+		return -ENOMEM;
 	}
 
 	/* Update our support page sizes bitmap */
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index d9cf2820c02e..447e40d55918 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1414,7 +1414,7 @@ static int omap_iommu_attach_init(struct device *dev,
 
 	odomain->num_iommus = omap_iommu_count(dev);
 	if (!odomain->num_iommus)
-		return -EINVAL;
+		return -ENODEV;
 
 	odomain->iommus = kcalloc(odomain->num_iommus, sizeof(*iommu),
 				  GFP_ATOMIC);
@@ -1464,7 +1464,7 @@ omap_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
 
 	if (!arch_data || !arch_data->iommu_dev) {
 		dev_err(dev, "device doesn't have an associated iommu\n");
-		return -EINVAL;
+		return -ENODEV;
 	}
 
 	spin_lock(&omap_domain->lock);
-- 
2.17.1




More information about the linux-arm-kernel mailing list