[PATCH v2 net-next 10/10] mips: dts: ralink: mt7621: add GB-PC2 LEDs
Arınç ÜNAL
arinc.unal at arinc9.com
Wed Sep 14 23:55:42 PDT 2022
Add the missing LEDs for GB-PC2. The ethblack-green, ethblue-green, power
and system LEDs weren't added previously, because they don't exist on the
device schematics. Tests on a GB-PC2 by me and Petr proved otherwise.
The i2c bus cannot be used on GB-PC2 as its pins are wired to LEDs instead,
and GB-PC1 does not use it. Therefore, do not enable it on both devices.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Tested-by: Petr Louda <petr.louda at outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
---
.../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 6 ---
.../boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 42 ++++++++++++++++---
2 files changed, 36 insertions(+), 12 deletions(-)
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 6ecb8165efe8..0128bd8fa7ed 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -20,12 +20,6 @@ chosen {
bootargs = "console=ttyS0,57600";
};
- palmbus: palmbus at 1e000000 {
- i2c at 900 {
- status = "okay";
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index 5f52193a4c37..7515555388ae 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -20,12 +20,6 @@ chosen {
bootargs = "console=ttyS0,57600";
};
- palmbus: palmbus at 1e000000 {
- i2c at 900 {
- status = "okay";
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -35,6 +29,42 @@ key-reset {
linux,code = <KEY_RESTART>;
};
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ ethblack-green {
+ label = "green:ethblack";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ ethblue-green {
+ label = "green:ethblue";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ ethyellow-green {
+ label = "green:ethyellow";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ ethyellow-orange {
+ label = "orange:ethyellow";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ system {
+ label = "green:system";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ };
+ };
};
&mmc {
--
2.34.1
More information about the linux-arm-kernel
mailing list