[PATCH v2 08/11] arm64: dts: ls1043a: add gpio based i2c recovery information

[Li Yang]

Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.

Signed-off-by: Zhang Ying <ying.zhang22455 at nxp.com>
Signed-off-by: Li Yang <leoyang.li at nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 5749de512201..58c55335f09c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "fsl,ls1043a";
@@ -538,7 +539,7 @@ dspi1: spi at 2110000 {
 		};
 
 		i2c0: i2c at 2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
@@ -553,7 +554,7 @@ i2c0: i2c at 2180000 {
 		};
 
 		i2c1: i2c at 2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
@@ -561,11 +562,12 @@ i2c1: i2c at 2190000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
 		i2c2: i2c at 21a0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
@@ -573,11 +575,12 @@ i2c2: i2c at 21a0000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
 		i2c3: i2c at 21b0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
@@ -585,6 +588,7 @@ i2c3: i2c at 21b0000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 			status = "disabled";
 		};
 
-- 
2.37.1