[PATCH 6/8] net: ethernet: ti: am65-cpsw: Add support for SGMII mode for J7200 CPSW5G
Russell King (Oracle)
linux at armlinux.org.uk
Wed Sep 14 08:44:12 PDT 2022
On Wed, Sep 14, 2022 at 03:20:51PM +0530, Siddharth Vadapalli wrote:
> Add support for SGMII mode in both fixed-link MAC2MAC master mode and
> MAC2PHY modes for CPSW5G ports.
>
> Add SGMII mode to the list of extra_modes in j7200_cpswxg_pdata.
>
> The MAC2PHY mode has been tested in fixed-link mode using a bootstrapped
> PHY. The MAC2MAC mode has been tested by a customer with J7200 SoC on
> their device.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> ---
> drivers/net/ethernet/ti/am65-cpsw-nuss.c | 19 ++++++++++++++++---
> 1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> index 1739c389af20..3f40178436ff 100644
> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> @@ -75,7 +75,15 @@
> #define AM65_CPSW_PORTN_REG_TS_CTL_LTYPE2 0x31C
>
> #define AM65_CPSW_SGMII_CONTROL_REG 0x010
> +#define AM65_CPSW_SGMII_MR_ADV_ABILITY_REG 0x018
This doesn't seem to be used in this patch, should it be part of some
other patch in the series?
> #define AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE BIT(0)
> +#define AM65_CPSW_SGMII_CONTROL_MASTER_MODE BIT(5)
Ditto.
> +
> +#define MAC2MAC_MR_ADV_ABILITY_BASE (BIT(15) | BIT(0))
> +#define MAC2MAC_MR_ADV_ABILITY_FULLDUPLEX BIT(12)
> +#define MAC2MAC_MR_ADV_ABILITY_1G BIT(11)
> +#define MAC2MAC_MR_ADV_ABILITY_100M BIT(10)
> +#define MAC2PHY_MR_ADV_ABILITY BIT(0)
Most of the above don't seem to be used, and the only one that seems to
be used is used in a variable declaration where the variable isn't used,
and thus us also unused.
>
> #define AM65_CPSW_CTL_VLAN_AWARE BIT(1)
> #define AM65_CPSW_CTL_P0_ENABLE BIT(2)
> @@ -1493,6 +1501,7 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
> struct am65_cpsw_slave_data *slave = container_of(config, struct am65_cpsw_slave_data,
> phylink_config);
> struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
> + u32 mr_adv_ability = MAC2MAC_MR_ADV_ABILITY_BASE;
This doesn't seem to be used; should it be part of a different patch?
I get the impression that most of this patch should be elsewhere in this
series.
> struct am65_cpsw_common *common = port->common;
> struct fwnode_handle *fwnode;
> bool fixed_link = false;
> @@ -2105,8 +2114,12 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx)
> __set_bit(PHY_INTERFACE_MODE_RMII,
> port->slave.phylink_config.supported_interfaces);
> } else if (common->pdata.extra_modes & BIT(port->slave.phy_if)) {
> - __set_bit(PHY_INTERFACE_MODE_QSGMII,
> - port->slave.phylink_config.supported_interfaces);
> + if (port->slave.phy_if == PHY_INTERFACE_MODE_QSGMII)
> + __set_bit(PHY_INTERFACE_MODE_QSGMII,
> + port->slave.phylink_config.supported_interfaces);
> + else
> + __set_bit(PHY_INTERFACE_MODE_SGMII,
> + port->slave.phylink_config.supported_interfaces);
> } else {
> dev_err(dev, "selected phy-mode is not supported\n");
> return -EOPNOTSUPP;
> @@ -2744,7 +2757,7 @@ static const struct am65_cpsw_pdata j7200_cpswxg_pdata = {
> .quirks = 0,
> .ale_dev_id = "am64-cpswxg",
> .fdqring_mode = K3_RINGACC_RING_MODE_RING,
> - .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
> + .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
> };
>
> static const struct of_device_id am65_cpsw_nuss_of_mtable[] = {
> --
> 2.25.1
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
More information about the linux-arm-kernel
mailing list