[PATCH 3/8] net: ethernet: ti: am65-cpsw: Add mac control function
Siddharth Vadapalli
s-vadapalli at ti.com
Wed Sep 14 02:50:48 PDT 2022
Add function am65_cpsw_nuss_mac_control() corresponding to the mac
control register writes that are performed in the
am65_cpsw_nuss_mac_link_up() function and use it in the
am65_cpsw_nuss_mac_link_up() function. The newly added function will be
used in am65_cpsw_nuss_mac_config() function in a future patch, thereby
making it necessary to define a new function for the redundant mac control
operations.
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 45 ++++++++++++++----------
1 file changed, 26 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 4e06def3b0de..c7e6ad374e1a 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1448,6 +1448,31 @@ static int am65_cpsw_init_phy(struct device *dev, struct device_node *port_np)
return ret;
}
+static void am65_cpsw_nuss_mac_control(struct am65_cpsw_port *port, phy_interface_t interface,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+ u32 mac_control = CPSW_SL_CTL_GMII_EN;
+
+ if (speed == SPEED_1000)
+ mac_control |= CPSW_SL_CTL_GIG;
+ if (speed == SPEED_10 && interface == PHY_INTERFACE_MODE_RGMII)
+ /* Can be used with in band mode only */
+ mac_control |= CPSW_SL_CTL_EXT_EN;
+ if (speed == SPEED_100 && interface == PHY_INTERFACE_MODE_RMII)
+ mac_control |= CPSW_SL_CTL_IFCTL_A;
+ if (duplex)
+ mac_control |= CPSW_SL_CTL_FULLDUPLEX;
+
+ /* rx_pause/tx_pause */
+ if (rx_pause)
+ mac_control |= CPSW_SL_CTL_RX_FLOW_EN;
+
+ if (tx_pause)
+ mac_control |= CPSW_SL_CTL_TX_FLOW_EN;
+
+ cpsw_sl_ctl_set(port->slave.mac_sl, mac_control);
+}
+
static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state)
{
@@ -1497,27 +1522,9 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
phylink_config);
struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
struct am65_cpsw_common *common = port->common;
- u32 mac_control = CPSW_SL_CTL_GMII_EN;
struct net_device *ndev = port->ndev;
- if (speed == SPEED_1000)
- mac_control |= CPSW_SL_CTL_GIG;
- if (speed == SPEED_10 && interface == PHY_INTERFACE_MODE_RGMII)
- /* Can be used with in band mode only */
- mac_control |= CPSW_SL_CTL_EXT_EN;
- if (speed == SPEED_100 && interface == PHY_INTERFACE_MODE_RMII)
- mac_control |= CPSW_SL_CTL_IFCTL_A;
- if (duplex)
- mac_control |= CPSW_SL_CTL_FULLDUPLEX;
-
- /* rx_pause/tx_pause */
- if (rx_pause)
- mac_control |= CPSW_SL_CTL_RX_FLOW_EN;
-
- if (tx_pause)
- mac_control |= CPSW_SL_CTL_TX_FLOW_EN;
-
- cpsw_sl_ctl_set(port->slave.mac_sl, mac_control);
+ am65_cpsw_nuss_mac_control(port, interface, speed, duplex, tx_pause, rx_pause);
/* enable phy */
am65_cpsw_enable_phy(port->slave.ifphy);
--
2.25.1
More information about the linux-arm-kernel
mailing list