[PATCH v3 7/7] phy: phy-mtk-tphy: fix the phy type setting issue

[Chunfeng Yun]

The PHY type is not set if the index is non zero, prepare type
value according to the index, like as mask value.

Fixes: 39099a443358 ("phy: phy-mtk-tphy: support type switch by pericfg")
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v3: add fixes tag suggested by AngeloGioacchino
v2: no changes
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index e0f227a0d3cc..cc10298bc70d 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -915,7 +915,7 @@ static int phy_type_syscon_get(struct mtk_phy_instance *instance,
 static int phy_type_set(struct mtk_phy_instance *instance)
 {
 	int type;
-	u32 mask;
+	u32 offset;
 
 	if (!instance->type_sw)
 		return 0;
@@ -938,8 +938,9 @@ static int phy_type_set(struct mtk_phy_instance *instance)
 		return 0;
 	}
 
-	mask = RG_PHY_SW_TYPE << (instance->type_sw_index * BITS_PER_BYTE);
-	regmap_update_bits(instance->type_sw, instance->type_sw_reg, mask, type);
+	offset = instance->type_sw_index * BITS_PER_BYTE;
+	regmap_update_bits(instance->type_sw, instance->type_sw_reg,
+			   RG_PHY_SW_TYPE << offset, type << offset);
 
 	return 0;
 }
-- 
2.18.0