[PATCH v1] dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML

Rob Herring robh at kernel.org
Tue Sep 13 08:32:45 PDT 2022


On Sun, Sep 11, 2022 at 11:20:10PM +0200, Johan Jonker wrote:
> Convert rockchip,rk3128-cru.txt to YAML.
> 
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> ---
>  .../bindings/clock/rockchip,rk3128-cru.txt    | 58 ---------------
>  .../bindings/clock/rockchip,rk3128-cru.yaml   | 73 +++++++++++++++++++
>  2 files changed, 73 insertions(+), 58 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> deleted file mode 100644
> index 6f8744fd3..000000000
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Rockchip RK3126/RK3128 Clock and Reset Unit
> -
> -The RK3126/RK3128 clock controller generates and supplies clock to various
> -controllers within the SoC and also implements a reset controller for SoC
> -peripherals.
> -
> -Required Properties:
> -
> -- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
> -  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
> -  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
> -- reg: physical base address of the controller and length of memory mapped
> -  region.
> -- #clock-cells: should be 1.
> -- #reset-cells: should be 1.
> -
> -Optional Properties:
> -
> -- rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changeable, due to the missing pll lock status.
> -
> -Each clock is assigned an identifier and client nodes can use this identifier
> -to specify the clock which they consume. All available clocks are defined as
> -preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
> -used in device tree sources. Similar macros exist for the reset sources in
> -these files.
> -
> -External clocks:
> -
> -There are several clocks that are generated outside the SoC. It is expected
> -that they are defined using standard clock bindings with following
> -clock-output-names:
> - - "xin24m" - crystal input - required,
> - - "ext_i2s" - external I2S clock - optional,
> - - "gmac_clkin" - external GMAC clock - optional
> -
> -Example: Clock controller node:
> -
> -	cru: cru at 20000000 {
> -		compatible = "rockchip,rk3128-cru";
> -		reg = <0x20000000 0x1000>;
> -		rockchip,grf = <&grf>;
> -
> -		#clock-cells = <1>;
> -		#reset-cells = <1>;
> -	};
> -
> -Example: UART controller node that consumes the clock generated by the clock
> -  controller:
> -
> -	uart2: serial at 20068000 {
> -		compatible = "rockchip,serial";
> -		reg = <0x20068000 0x100>;
> -		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> -		clock-frequency = <24000000>;
> -		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> -		clock-names = "sclk_uart", "pclk_uart";
> -	};
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
> new file mode 100644
> index 000000000..03e5d7f0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
> +
> +maintainers:
> +  - Elaine Zhang <zhangqing at rock-chips.com>
> +  - Heiko Stuebner <heiko at sntech.de>
> +
> +description: |
> +  The RK3126/RK3128 clock controller generates and supplies clock to various
> +  controllers within the SoC and also implements a reset controller for SoC
> +  peripherals.
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All available clocks are defined as
> +  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
> +  used in device tree sources. Similar macros exist for the reset sources in
> +  these files.

> +  There are several clocks that are generated outside the SoC. It is expected
> +  that they are defined using standard clock bindings with following
> +  clock-output-names:

Which node does clock-output-names live in?

>From the description, it sounds more like this should be 
clocks/clock-names.

> +    - "xin24m"     - crystal input       - required
> +    - "ext_i2s"    - external I2S clock  - optional
> +    - "gmac_clkin" - external GMAC clock - optional



More information about the linux-arm-kernel mailing list