[linux][PATCH v9 2/2] dts: arm: at91: Add SAMA5D3-EDS Board

[Krzysztof Kozlowski]

On 13/09/2022 08:37, Claudiu.Beznea at microchip.com wrote:
> On 09.09.2022 19:30, Jerry Ray wrote:
>> The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
>> evaluating many Microchip ethernet switch and PHY products.  Various
>> daughter cards can connect via an RGMII connector or an RMII connector.
>>
>> The EDS board is not intended for stand-alone use and has no ethernet
>> capabilities when no daughter board is connected.  As such, this device
>> tree is intended to be used with a DT overlay defining the add-on board.
>> To better ensure consistency, some items are defined here as a form of
>> documentation so that all add-on overlays will use the same terms.
>>
>> Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM
>> Signed-off-by: Jerry Ray <jerry.ray at microchip.com>
>> ---
>> v8->v9:
>>  - Changed node name from gpio to gpio-inputs
> 
> Why not gpio-keys as all other DTSes are doing? Anyway, I can change it
> while applying.

+1 even if these are not physical keys. If we ever run sed pattern, it
would make life easier... :)


Best regards,
Krzysztof