[PATCH 2/3] ARM: dts: qcom-msm8660: Add GSBI3 I2C bus

[Linus Walleij]

GSBI3 can be used to enable an external I2C bus on e.g. the
APQ8060. On the DragonBoard APQ8060 this I2C bus is used to
talk to the Cypress CY8CTMA340 CYTTSP touchscreen.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/dts/qcom-msm8660.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 5640c02db852..f3131bee752e 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -156,6 +156,31 @@ gsbi1_spi: spi at 16080000 {
 			};
 		};
 
+		gsbi3: gsbi at 16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c at 16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		gsbi6: gsbi at 16500000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <12>;
-- 
2.37.3