[PATCH V3 0/2] clk: imx: introduce fsl,always-on-clocks

[Krzysztof Kozlowski]

On 13/09/2022 12:29, Marco Felsch wrote:
> Hi Peng,
> 
> On 22-09-13, Peng Fan (OSS) wrote:
>> From: Peng Fan <peng.fan at nxp.com>
>>
>> V3:
>>  Rename to fsl,always-on-clocks 
>>
>> V2:
>>  Use protected-clocks
>>  https://lore.kernel.org/all/20220816130327.2987710-1-peng.fan@oss.nxp.com/
>>
>> V1:
>>  Use fsl,protected-clocks
>>  https://lore.kernel.org/all/20220815033632.1687854-1-peng.fan@oss.nxp.com/
>>
>> There are two cases that I wanna this property could serve:
>> Virtualization: root cell linux run in parallel with inmate cell
>> AMP: M7/4 runs in parallel with A53
>>
>> The major case is:
>> Jailhouse hypervisor only support partition, so devices are partitioned.
>> But there is only CCM module that provides clock, the CCM is handled by
>> root cell linux, need make sure the root cell linux not shutdown the
>> clocks using by inmate cell.
>>
>> I was thinking whether need to provide a rate entry to ask root cell
>> configure the clk rate for inmate cell. But NXP downstream not have it,
>> see https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/clk/imx/clk-imx8mp.c?h=lf-5.15.y#n690
>> So just leave the property as uint32-array.
> 
> Can you please check my recent proposal? I recently stumbled over such
> an issue on the mx8mm-evk as well but with the 32k clock provided by the
> pmic. Unfortunately I forgot to add you to the to list, I will change
> that. If that proposal will fix your problem, I would like to go the
> generic way.
> 
> https://patchwork.kernel.org/project/linux-clk/list/?series=676522

Your proposal does not change bindings. You cannot introduce new
properties without documenting them in the bindings.

Unless you documented them somewhere, but this is no reflected in
Patchwork at all.


Best regards,
Krzysztof