[PATCH -next] clk: clocking-wizard: Use dev_err_probe() helper

[Yang Yingliang]

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.

Signed-off-by: Yang Yingliang <yangyingliang at huawei.com>
---
 drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
index 5b8433468cc5..eb1dfe7ecc1b 100644
--- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
@@ -448,18 +448,14 @@ static int clk_wzrd_probe(struct platform_device *pdev)
 	}
 
 	clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
-	if (IS_ERR(clk_wzrd->clk_in1)) {
-		if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER))
-			dev_err(&pdev->dev, "clk_in1 not found\n");
-		return PTR_ERR(clk_wzrd->clk_in1);
-	}
+	if (IS_ERR(clk_wzrd->clk_in1))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1),
+				     "clk_in1 not found\n");
 
 	clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
-	if (IS_ERR(clk_wzrd->axi_clk)) {
-		if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER))
-			dev_err(&pdev->dev, "s_axi_aclk not found\n");
-		return PTR_ERR(clk_wzrd->axi_clk);
-	}
+	if (IS_ERR(clk_wzrd->axi_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->axi_clk),
+				     "s_axi_aclk not found\n");
 	ret = clk_prepare_enable(clk_wzrd->axi_clk);
 	if (ret) {
 		dev_err(&pdev->dev, "enabling s_axi_aclk failed\n");
-- 
2.25.1