[PATCH v2 3/5] arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation

[Tim Harvey]

Since commit 65ac79e18120 ("net: dsa: microchip: add the phylink
get_caps") the phy-mode must be set otherwise the switch driver will
assume "NA" mode and invalidate the port.

Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400
dts support")
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v2: no changes
---
 arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 3df7ee9a2fe1..211e6a1b296e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -483,30 +483,35 @@ ports {
 			lan1: port at 0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan2: port at 1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan3: port at 2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan4: port at 3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan5: port at 4 {
 				reg = <4>;
 				label = "lan5";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
-- 
2.25.1