[PATCH v2 04/15] dt-bindings: memory: Add Baikal-T1 DDRC DT-schema

[Rob Herring]

On Sat, 10 Sep 2022 22:56:48 +0300, Serge Semin wrote:
> Baikal-T1 DDR controller is based on the DW uMCTL2 DDRC IP-core v2.51a
> with up to DDR3 protocol capability and 32-bit data bus + 8-bit ECC. There
> are individual IRQs for each ECC and DFI events. The dedicated scrubber
> clock source is absent since it's fully synchronous to the core clock.
> In addition to that the DFI-DDR PHY CSRs can be accessed via a separate
> registers space.
> 
> Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
> 
> ---
> 
> Changelog v2:
> - Keep the alphabetically ordered compatible strings list. (@Krzysztof)
> - Fix grammar nitpicks in the patch log. (@Krzysztof)
> - Drop the PHY CSR region. (@Rob)
> - Move the device bindings to the separate DT-schema.
> ---
>  .../memory-controllers/baikal,bt1-ddrc.yaml   | 91 +++++++++++++++++++
>  1 file changed, 91 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/baikal,bt1-ddrc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/memory-controllers/baikal,bt1-ddrc.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml
Error: Documentation/devicetree/bindings/memory-controllers/baikal,bt1-ddrc.example.dts:41.30-31 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:384: Documentation/devicetree/bindings/memory-controllers/baikal,bt1-ddrc.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1420: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.