[PATCH 3/6] arm64: dts: rockchip: rk3399-rock-4c-plus: sort nodes/properties
FUKAUMI Naoki
naoki at radxa.com
Fri Sep 9 12:50:03 PDT 2022
sort nodes/properties alphabetically
Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
---
.../boot/dts/rockchip/rk3399-rock-4c-plus.dts | 48 +++++++++----------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index c88a7512e296..fdee9d7b2372 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -23,15 +23,6 @@ chosen {
stdout-path = "serial2:1500000n8";
};
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk809 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -61,6 +52,15 @@ led-1 {
};
};
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
vcc_3v3: vcc-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3";
@@ -71,13 +71,14 @@ vcc_3v3: vcc-3v3-regulator {
vin-supply = <&vcc3v3_sys>;
};
- vcc5v0_sys: vcc5v0-sys-regulator {
+ vcc3v3_phy1: vcc3v3-phy1-regulator {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
+ regulator-name = "vcc3v3_phy1";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
};
vcc5v0_host1: vcc5v0-host-regulator {
@@ -92,6 +93,15 @@ vcc5v0_host1: vcc5v0-host-regulator {
vin-supply = <&vcc5v0_host0_s0>;
};
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
vcc5v0_typec: vcc5v0-typec-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -104,16 +114,6 @@ vcc5v0_typec: vcc5v0-typec-regulator {
vin-supply = <&vcc5v0_sys>;
};
- vcc3v3_phy1: vcc3v3-phy1-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_phy1";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3>;
- };
-
vdd_log: vdd-log-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd_log";
@@ -447,8 +447,8 @@ &i2s2 {
};
&io_domains {
- bt656-supply = <&vcc_3v0_s0>;
audio-supply = <&vcc_1v8_s0>;
+ bt656-supply = <&vcc_3v0_s0>;
gpio1830-supply = <&vcc_3v0_s0>;
sdmmc-supply = <&vcc_sdio_s0>;
status = "okay";
--
2.30.2
More information about the linux-arm-kernel
mailing list