[PATCH 4/4] media: sun8i-a83t-mipi-csi2: Register async subdev with no sensor attached

[Paul Kocialkowski]

This allows the device to probe and register its async subdev without
a sensor attached.

The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.

Fixes: 576d196c522b ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
---
 .../sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
index 5e1c25db7bc4..d993c09a4820 100644
--- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
+++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
@@ -536,6 +536,7 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
 	struct v4l2_async_notifier *notifier = &bridge->notifier;
 	struct media_pad *pads = bridge->pads;
 	struct device *dev = csi2_dev->dev;
+	bool notifier_registered = false;
 	int ret;
 
 	mutex_init(&bridge->lock);
@@ -573,12 +574,17 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
 	notifier->ops = &sun8i_a83t_mipi_csi2_notifier_ops;
 
 	ret = sun8i_a83t_mipi_csi2_bridge_source_setup(csi2_dev);
-	if (ret)
+	if (ret && ret != -ENODEV)
 		goto error_v4l2_notifier_cleanup;
 
-	ret = v4l2_async_subdev_nf_register(subdev, notifier);
-	if (ret < 0)
-		goto error_v4l2_notifier_cleanup;
+	/* Only register the notifier when a sensor is connected. */
+	if (ret != -ENODEV) {
+		ret = v4l2_async_subdev_nf_register(subdev, notifier);
+		if (ret < 0)
+			goto error_v4l2_notifier_cleanup;
+
+		notifier_registered = true;
+	}
 
 	/* V4L2 Subdev */
 
@@ -589,7 +595,8 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
 	return 0;
 
 error_v4l2_notifier_unregister:
-	v4l2_async_nf_unregister(notifier);
+	if (notifier_registered)
+		v4l2_async_nf_unregister(notifier);
 
 error_v4l2_notifier_cleanup:
 	v4l2_async_nf_cleanup(notifier);
-- 
2.37.3