[PATCH v2 2/5] dt-bindings: net: Add Broadcom BCM4377 family PCIe Bluetooth

[Martin Povišer]

> On 8. 9. 2022, at 13:19, Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:
> 
> On 07/09/2022 19:09, Sven Peter wrote:
>> These chips are combined Wi-Fi/Bluetooth radios which expose a
>> PCI subfunction for the Bluetooth part.
>> They are found in Apple machines such as the x86 models with the T2
>> chip or the arm64 models with the M1 or M2 chips.
>> 
>> Signed-off-by: Sven Peter <sven at svenpeter.dev>
>> ---
>> changes from v1:
>> - added apple,* pattern to brcm,board-type
>> - s/PCI/PCIe/
>> - fixed 1st reg cell inside the example to not contain the bus number
>> 
>> .../bindings/net/brcm,bcm4377-bluetooth.yaml | 78 +++++++++++++++++++
>> MAINTAINERS | 1 +
>> 2 files changed, 79 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm4377-bluetooth.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4377-bluetooth.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4377-bluetooth.yaml
>> new file mode 100644
>> index 000000000000..fb851f8e6bcb
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/brcm,bcm4377-bluetooth.yaml
>> @@ -0,0 +1,78 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/brcm,bcm4377-bluetooth.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Broadcom BCM4377 family PCIe Bluetooth Chips
>> +
>> +allOf:
>> + - $ref: bluetooth-controller.yaml#
> 
> Put it before properties (so after description).
> 
>> +
>> +maintainers:
>> + - Sven Peter <sven at svenpeter.dev>
>> +
>> +description:
>> + This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
>> + usually found in Apple machines. The Wi-Fi part of the chip is described in
>> + bindings/net/wireless/brcm,bcm4329-fmac.yaml.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - pci14e4,5fa0 # BCM4377
>> + - pci14e4,5f69 # BCM4378
>> + - pci14e4,5f71 # BCM4387
>> +
>> + reg:
>> + description: PCI device identifier.
> 
> maxItems: X
> 
>> +
>> + brcm,board-type:
>> + $ref: /schemas/types.yaml#/definitions/string
>> + description: Board type of the Bluetooth chip. This is used to decouple
>> + the overall system board from the Bluetooth module and used to construct
>> + firmware and calibration data filenames.
>> + On Apple platforms, this should be the Apple module-instance codename
>> + prefixed by "apple,", e.g. "apple,atlantisb".
>> + pattern: '^apple,.*'
>> +
>> + brcm,taurus-cal-blob:
>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>> + description: A per-device calibration blob for the Bluetooth radio. This
>> + should be filled in by the bootloader from platform configuration
>> + data, if necessary, and will be uploaded to the device.
>> + This blob is used if the chip stepping of the Bluetooth module does not
>> + support beamforming.
> 
> Isn't it:
> s/beamforming/beam forming/
> ?

Doesn’t seem like it:
https://www.google.com/search?hl=en&q=beam%20forming

Best,
Martin

>> +
>> + brcm,taurus-bf-cal-blob:
>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>> + description: A per-device calibration blob for the Bluetooth radio. This
>> + should be filled in by the bootloader from platform configuration
>> + data, if necessary, and will be uploaded to the device.
>> + This blob is used if the chip stepping of the Bluetooth module supports
>> + beamforming.
> 
> Same here.


> Best regards,
> Krzysztof