[linux][PATCH 6/6] ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60_curiosity board

[Krzysztof Kozlowski]

On 07/09/2022 11:20, Hari Prasath wrote:
> From: Manikandan M <manikandan.m at microchip.com>
> 
> Add device tree file for sam9x60_curiosity board.
> 
> Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
> Signed-off-by: Manikandan M <manikandan.m at microchip.com>
> Signed-off-by: Hari Prasath <Hari.PrasathGE at microchip.com>
> ---
>  .../devicetree/bindings/arm/atmel-at91.yaml   |   6 +

Bindings are separate patches.

>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/at91-sam9x60_curiosity.dts  | 532 ++++++++++++++++++
>  3 files changed, 539 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
> index 2b7848bb7769..fae3a3090fbd 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
> +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
> @@ -97,6 +97,12 @@ properties:
>            - const: microchip,sam9x60
>            - const: atmel,at91sam9
>  
> +      - description: SAM9X60 Curiosity board
> +        items:
> +          - const: microchip,sam9x60-curiosity
> +          - const: microchip,sam9x60
> +          - const: atmel,at91sam9

This should be rather together with previous entry as an enum.

> +
>        - description: Nattis v2 board with Natte v2 power board
>          items:
>            - const: axentia,nattis-2
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 595e870750cd..cd60cda5d187 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
>  	at91sam9x25ek.dtb \
>  	at91sam9x35ek.dtb
>  dtb-$(CONFIG_SOC_SAM9X60) += \
> +	at91-sam9x60_curiosity.dtb \
>  	at91-sam9x60ek.dtb
>  dtb-$(CONFIG_SOC_SAM_V7) += \
>  	at91-kizbox2-2.dtb \
> diff --git a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
> new file mode 100644
> index 000000000000..75e6727b5e3a
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
> @@ -0,0 +1,532 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 CURIOSITY board
> + *
> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Manikandan M <manikandan.m at microchip.com>
> + */
> +/dts-v1/;
> +#include "sam9x60.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Microchip SAM9X60 CURIOSITY";
> +	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
> +
> +	aliases {
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c6;
> +		serial2 = &uart7;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory at 20000000 {
> +		reg = <0x20000000 0x8000000>;
> +	};
> +
> +	clocks {
> +		slow_xtal {

No underscores in node names... If you override nodes, do it via label.

> +			clock-frequency = <32768>;
> +		};
> +
> +		main_xtal {
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_key_gpio_default>;
> +		status = "okay";

Okay is by default.

> +
> +		button-user {
> +			label = "PB_USER";
> +			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_PROG1>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;
> +		status = "okay";

Ditto

> +
> +		red {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

You need to fix all warnings in your DTS.
> +			label = "red";
> +			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		green {
> +			label = "green";
> +			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		blue {
> +			label = "blue";
> +			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	regulators: regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		vdd_1v8: fixed-regulator-vdd_1v8 at 0 {


No underscores in node names. No prefix "fixed-". This is just a  regulator.

> +			compatible = "regulator-fixed";
> +			regulator-name = "VDD_1V8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-always-on;
> +			status = "okay";

Really?

> +		};
> +
> +		vdd_1v15: fixed-regulator-vdd_1v15 at 1 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VDD_1V15";
> +			regulator-min-microvolt = <1150000>;
> +			regulator-max-microvolt = <1150000>;
> +			regulator-always-on;
> +			status = "okay";
> +		};
> +
> +		vdd1_3v3: fixed-regulator-vdd1_3v3 at 2 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VDD1_3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +			status = "okay";
> +		};
> +	};
> +};
> +
> +&adc {
> +	vddana-supply = <&vdd1_3v3>;
> +	vref-supply = <&vdd1_3v3>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
> +	status = "okay";
> +};
> +
> +&can0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can0_rx_tx>;
> +	status = "disabled"; /* Conflict with dbgu. */
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can1_rx_tx>;
> +	status = "okay";
> +};
> +
> +&dbgu {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_dbgu>;
> +	status = "okay"; /* Conflict with can0. */
> +};
> +
> +&ebi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
> +	status = "okay";
> +
> +	nand_controller: nand-controller {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
> +		status = "okay";
> +
> +		nand at 3 {
> +			reg = <0x3 0x0 0x800000>;
> +			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
> +			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
> +			nand-bus-width = <8>;
> +			nand-ecc-mode = "hw";
> +			nand-ecc-strength = <8>;
> +			nand-ecc-step-size = <512>;
> +			nand-on-flash-bbt;
> +			label = "atmel_nand";
> +
> +			partitions {
> +				compatible = "fixed-partitions";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +
> +				at91bootstrap at 0 {
> +					label = "at91bootstrap";
> +					reg = <0x0 0x40000>;
> +				};
> +
> +				uboot at 40000 {
> +					label = "u-boot";
> +					reg = <0x40000 0xc0000>;
> +				};
> +
> +				ubootenvred at 100000 {
> +					label = "U-Boot Env Redundant";
> +					reg = <0x100000 0x40000>;
> +				};
> +
> +				ubootenv at 140000 {
> +					label = "U-Boot Env";
> +					reg = <0x140000 0x40000>;
> +				};
> +
> +				dtb at 180000 {
> +					label = "device tree";
> +					reg = <0x180000 0x80000>;
> +				};
> +
> +				kernel at 200000 {
> +					label = "kernel";
> +					reg = <0x200000 0x600000>;
> +				};
> +
> +				rootfs at 800000 {
> +					label = "rootfs";
> +					reg = <0x800000 0x1f800000>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&flx0 {
> +	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> +	status = "okay";
> +
> +	i2c0: i2c at 600 {
> +		dmas = <0>, <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flx0_default>;
> +		i2c-analog-filter;
> +		i2c-digital-filter;
> +		i2c-digital-filter-width-ns = <35>;
> +		status = "okay";

??

> +
> +		eeprom at 53 {
> +			compatible = "atmel,24c02";
> +			reg = <0x53>;
> +			pagesize = <16>;
> +			status = "okay";
> +		};
> +	};
> +};
> +
> +&flx6 {
> +	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> +	status = "okay";
> +
> +	i2c6: i2c at 600 {
> +		dmas = <0>, <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flx6_default>;
> +		i2c-analog-filter;
> +		i2c-digital-filter;
> +		i2c-digital-filter-width-ns = <35>;
> +		status = "disabled";
> +	};
> +};
> +
> +&flx7 {
> +	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
> +	status = "okay";
> +
> +	uart7: serial at 200 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flx7_default>;
> +		status = "okay";
> +	};
> +};
> +
> +&macb0 {
> +	phy-mode = "rmii";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_macb0_rmii>;
> +	status = "okay";
> +
> +	ethernet-phy at 0 {
> +		reg = <0x0>;
> +	};
> +};
> +
> +&pinctrl {
> +	adc {
> +		pinctrl_adc_default: adc_default {

No underscores in node names.



Best regards,
Krzysztof