[linux][PATCH 5/6] ARM: dts: at91: sam9x60: Add missing flexcom definitions

Claudiu.Beznea at microchip.com Claudiu.Beznea at microchip.com
Thu Sep 8 00:58:36 PDT 2022


On 07.09.2022 12:20, Hari Prasath wrote:
> From: Durai Manickam KR <durai.manickamkr at microchip.com>
> 
> Added the missing flexcom functions for all the flexcom nodes.

Did you got the chance to test all these?

> 
> Signed-off-by: Manikandan M <manikandan.m at microchip.com>
> Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
> Signed-off-by: Hari Prasath <Hari.PrasathGE at microchip.com>
> ---
>  arch/arm/boot/dts/sam9x60.dtsi | 547 +++++++++++++++++++++++++++++++++
>  1 file changed, 547 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
> index feeabc53e0ec..1c580c3ba7c3 100644
> --- a/arch/arm/boot/dts/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/sam9x60.dtsi
> @@ -170,6 +170,27 @@
>  				ranges = <0x0 0xf0000000 0x800>;
>  				status = "disabled";
>  
> +				uart4: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(8))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(9))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
>  				spi4: spi at 400 {
>  					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
>  					reg = <0x400 0x200>;
> @@ -188,6 +209,24 @@
>  					atmel,fifo-size = <16>;
>  					status = "disabled";
>  				};
> +
> +				i2c4: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(8))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(9))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx5: flexcom at f0004000 {
> @@ -219,6 +258,43 @@
>  					atmel,fifo-size = <16>;
>  					status = "disabled";
>  				};
> +
> +				spi5: spi at 400 {
> +					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +					reg = <0x400 0x200>;
> +					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> +					clock-names = "spi_clk";
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(10))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(11))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c5: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(10))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(11))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			dma0: dma-controller at f0008000 {
> @@ -290,6 +366,45 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf0020000 0x800>;
>  				status = "disabled";
> +
> +				uart11: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(22))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(23))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c11: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(22))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(23))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx12: flexcom at f0024000 {
> @@ -300,6 +415,45 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf0024000 0x800>;
>  				status = "disabled";
> +
> +				uart12: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(24))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(25))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c12: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(24))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(25))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			pit64b: timer at f0028000 {
> @@ -419,6 +573,27 @@
>  				ranges = <0x0 0xf8010000 0x800>;
>  				status = "disabled";
>  
> +				uart6: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(12))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(13))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
>  				i2c6: i2c at 600 {
>  					compatible = "microchip,sam9x60-i2c";
>  					reg = <0x600 0x200>;
> @@ -446,6 +621,45 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8014000 0x800>;
>  				status = "disabled";
> +
> +				uart7: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(14))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(15))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c7: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(14))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(15))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx8: flexcom at f8018000 {
> @@ -456,15 +670,96 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8018000 0x800>;
>  				status = "disabled";
> +
> +				uart8: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(16))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(17))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c8: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(16))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(17))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx0: flexcom at f801c000 {
>  				compatible = "atmel,sama5d2-flexcom";
>  				reg = <0xf801c000 0x200>;
>  				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
>  				ranges = <0x0 0xf801c000 0x800>;
>  				status = "disabled";
>  
> +				uart0: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(0))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(1))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				spi0: spi at 400 {
> +					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +					reg = <0x400 0x200>;
> +					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> +					clock-names = "spi_clk";
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(0))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(1))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
>  				i2c0: i2c at 600 {
>  					compatible = "microchip,sam9x60-i2c";
>  					reg = <0x600 0x200>;
> @@ -494,6 +789,64 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8020000 0x800>;
>  				status = "disabled";
> +
> +				uart1: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(2))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(3))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				spi1: spi at 400 {
> +					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +					reg = <0x400 0x200>;
> +					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> +					clock-names = "spi_clk";
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(2))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(3))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c1: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(2))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(3))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx2: flexcom at f8024000 {
> @@ -504,6 +857,64 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8024000 0x800>;
>  				status = "disabled";
> +
> +				uart2: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(4))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(5))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				spi2: spi at 400 {
> +					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +					reg = <0x400 0x200>;
> +					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> +					clock-names = "spi_clk";
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(4))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(5))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c2: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(4))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(5))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx3: flexcom at f8028000 {
> @@ -514,6 +925,64 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8028000 0x800>;
>  				status = "disabled";
> +
> +				uart3: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(6))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(7))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				spi3: spi at 400 {
> +					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
> +					reg = <0x400 0x200>;
> +					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> +					clock-names = "spi_clk";
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(6))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(7))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c3: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(6))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(7))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			macb0: ethernet at f802c000 {
> @@ -579,6 +1048,45 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8040000 0x800>;
>  				status = "disabled";
> +
> +				uart9: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(18))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(19))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c9: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(18))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(19))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			flx10: flexcom at f8044000 {
> @@ -589,6 +1097,45 @@
>  				#size-cells = <1>;
>  				ranges = <0x0 0xf8044000 0x800>;
>  				status = "disabled";
> +
> +				uart10: serial at 200 {
> +					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
> +					reg = <0x200 0x200>;
> +					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(20))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(21))>;
> +					dma-names = "tx", "rx";
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> +					clock-names = "usart";
> +					atmel,use-dma-rx;
> +					atmel,use-dma-tx;
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
> +
> +				i2c10: i2c at 600 {
> +					compatible = "microchip,sam9x60-i2c";
> +					reg = <0x600 0x200>;
> +					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
> +					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> +					dmas = <&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(20))>,
> +						<&dma0
> +						(AT91_XDMAC_DT_MEM_IF(0) |
> +						 AT91_XDMAC_DT_PER_IF(1) |
> +						 AT91_XDMAC_DT_PERID(21))>;
> +					dma-names = "tx", "rx";
> +					atmel,fifo-size = <16>;
> +					status = "disabled";
> +				};
>  			};
>  
>  			isi: isi at f8048000 {



More information about the linux-arm-kernel mailing list