[PATCH] dt-bindings: pinctrl: update bindings for MT7986 SoC

[Rob Herring]

On Fri, Sep 02, 2022 at 10:47:19AM +0800, Peter Chiu wrote:
> Add wifi pins in the description and set groups to string-array to support
> multiple groups in a node.
> 
> Reviewed-by: Sam Shih <sam.shih at mediatek.com>
> Signed-off-by: Peter Chiu <chui-hao.chiu at mediatek.com>
> ---
>  .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 48 +++++++++++--------
>  1 file changed, 28 insertions(+), 20 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> index 4eadea55df10..b08a0a8076e0 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> @@ -117,6 +117,10 @@ patternProperties:
>            "i2s"             "audio"     62, 63, 64, 65
>            "switch_int"      "eth"       66
>            "mdc_mdio"        "eth"       67
> +          "wf_2g"           "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83
> +          "wf_5g"           "wifi"      91, 92, 93, 94, 95, 96, 97, 98, 99, 100
> +          "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
> +                                        84, 85
>  
>          $ref: "/schemas/pinctrl/pinmux-node.yaml"
>          properties:
> @@ -234,7 +238,9 @@ patternProperties:
>              then:
>                properties:
>                  groups:
> -                  enum: [wf_2g, wf_5g, wf_dbdc]
> +                  $ref: /schemas/types.yaml#/definitions/string-array

'groups' already has a type. You can redefine it here.

> +                  items:
> +                    enum: [wf_2g, wf_5g, wf_dbdc]
>        '.*conf.*':
>          type: object
>          additionalProperties: false
> @@ -248,25 +254,27 @@ patternProperties:
>                An array of strings. Each string contains the name of a pin.
>                There is no PIN 41 to PIN 65 above on mt7686b, you can only use
>                those pins on mt7986a.
> -            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
> -                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
> -                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
> -                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
> -                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
> -                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
> -                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
> -                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
> -                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
> -                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
> -                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
> -                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
> -                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
> -                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
> -                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
> -                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
> -                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
> -                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
> -                   WF1_HB8]
> +            $ref: /schemas/types.yaml#/definitions/string-array
> +            items:

Same for 'pins'.

> +              enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
> +                     GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
> +                     GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
> +                     GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
> +                     SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
> +                     SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
> +                     UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
> +                     UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
> +                     UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
> +                     EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
> +                     EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
> +                     PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
> +                     WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
> +                     WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
> +                     WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
> +                     WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
> +                     WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
> +                     WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
> +                     WF1_HB8]
>  
>            bias-disable: true
>  
> -- 
> 2.18.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>