[PATCH V5 5/8] soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
Alexander Stein
alexander.stein at ew.tq-group.com
Wed Sep 7 04:50:02 PDT 2022
Hello,
Am Mittwoch, 7. September 2022, 04:41:46 CEST schrieb Peng Fan:
> On 9/6/2022 10:37 PM, Alexander Stein wrote:
> > Hello,
> >
> > Am Montag, 22. August 2022, 08:45:33 CEST schrieb Peng Fan (OSS):
> >> From: Peng Fan <peng.fan at nxp.com>
> >>
> >> i.MX8MP HDMI supports HDCP and HRV_MWR(HDMI RX Video Memory Write Master
> >> for RXRX validation), so add them.
> >>
> >> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> >> ---
> >>
> >> drivers/soc/imx/imx8mp-blk-ctrl.c | 30 ++++++++++++++++++++++++++++++
> >> 1 file changed, 30 insertions(+)
> >>
> >> diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c
> >> b/drivers/soc/imx/imx8mp-blk-ctrl.c index 6f983adcb47c..527d45d12a54
> >> 100644
> >> --- a/drivers/soc/imx/imx8mp-blk-ctrl.c
> >> +++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
> >> @@ -235,6 +235,13 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct
> >> imx8mp_blk_ctrl *bc, regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
> >> BIT(12));
> >>
> >> regmap_clear_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
> >> break;
> >>
> >> + case IMX8MP_HDMIBLK_PD_HDCP:
> >> + regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(11));
> >> + break;
> >> + case IMX8MP_HDMIBLK_PD_HRV:
> >> + regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(3) |
> >
> > BIT(4) | BIT(5));
> >
> >> + regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
> >
> > BIT(15));
> >
> >> + break;
> >>
> >> default:
> >> break;
> >>
> >> }
> >>
> >> @@ -283,6 +290,13 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct
> >> imx8mp_blk_ctrl *bc, regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
> >> BIT(12));
> >>
> >> regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22)
> > |
> > | BIT(24));
> > |
> >> break;
> >>
> >> + case IMX8MP_HDMIBLK_PD_HDCP:
> >> + regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
> >
> > BIT(11));
> >
> >> + break;
> >> + case IMX8MP_HDMIBLK_PD_HRV:
> >> + regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
> >
> > BIT(15));
> >
> >> + regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(3)
> >>
> > | BIT(4) |
> >>
> >> BIT(5)); + break;
> >>
> >> default:
> >> break;
> >>
> >> }
> >>
> >> @@ -365,6 +379,22 @@ static const struct imx8mp_blk_ctrl_domain_data
> >> imx8mp_hdmi_domain_data[] = { .num_clks = 2,
> >>
> >> .gpc_name = "hdmi-tx-phy",
> >>
> >> },
> >>
> >> + [IMX8MP_HDMIBLK_PD_HRV] = {
> >> + .name = "hdmiblk-hrv",
> >> + .clk_names = (const char *[]){ "axi", "apb" },
> >> + .num_clks = 2,
> >> + .gpc_name = "hrv",
> >> + .path_names = (const char *[]){"hrv"},
> >> + .num_paths = 1,
> >> + },
> >> + [IMX8MP_HDMIBLK_PD_HDCP] = {
> >> + .name = "hdmiblk-hdcp",
> >> + .clk_names = (const char *[]){ "axi", "apb" },
> >> + .num_clks = 2,
> >> + .gpc_name = "hdcp",
> >> + .path_names = (const char *[]){"hdcp"},
> >> + .num_paths = 1,
> >> + },
> >>
> >> };
> >>
> >> static const struct imx8mp_blk_ctrl_data imx8mp_hdmi_blk_ctl_dev_data =
> >> {
> >
> > Something is missing here. Iget the following error during boot:
> > [ 0.886211] Unable to handle kernel NULL pointer dereference at virtual
> > address 0000000000000000
> > [ 0.895043] Mem abort info:
> > [ 0.897841] ESR = 0x0000000096000004
> > [ 0.901606] EC = 0x25: DABT (current EL), IL = 32 bits
> > [ 0.906942] SET = 0, FnV = 0
> > [ 0.910003] EA = 0, S1PTW = 0
> > [ 0.913159] FSC = 0x04: level 0 translation fault
> > [ 0.918054] Data abort info:
> > [ 0.920943] ISV = 0, ISS = 0x00000004
> > [ 0.924791] CM = 0, WnR = 0
> > [ 0.927761] [0000000000000000] user address but active_mm is swapper
> > [ 0.934157] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> > [ 0.939749] Modules linked in:
> > [ 0.942813] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc4-
> > next-20220906+ #674 2c55fa642ba20b0dbb66c0e78dacc9ca96d5e733
> > [ 0.954099] Hardware name: TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL
> > (DT) [ 0.961100] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS
> > BTYPE=--) [ 0.968099] pc : kobject_set_name_vargs+0x10/0xd0
> > [ 0.972823] lr : dev_set_name+0x58/0x80
> > [ 0.976674] sp : ffff800009c7b860
> > [ 0.979997] x29: ffff800009c7b860 x28: ffff000002d728f8 x27:
> > 0000000000000150
> > [ 0.987172] x26: 0000000000000009 x25: 0000000000000007 x24:
> > ffff800009ab8958
> > [ 0.994347] x23: ffff0000000a0000 x22: ffff800008eb77d8 x21:
> > ffff000000225410
> > [ 1.001524] x20: ffff800008eb7808 x19: 0000000000000000 x18:
> > 0000000000000000
> > [ 1.008697] x17: 702d78742d696d64 x16: 682d6b6c62696d64 x15:
> > 68203a656d616e3e
> > [ 1.015872] x14: 0000000000000000 x13: 70636468203a656d x12:
> > 616e5f6370673e2d
> > [ 1.023047] x11: 61746164203a6c72 x10: 74632d6b6c622e30 x9 :
> > 7274632d6b6c622e
> > [ 1.030222] x8 : 3030303063663233 x7 : 205d353039393738 x6 :
> > ffff800009a240e0
> > [ 1.037397] x5 : 00000000ffffffd0 x4 : ffff800009c7b920 x3 :
> > 00000000ffffffd0
> > [ 1.044572] x2 : ffff800009c7b8d0 x1 : ffff80000936ca78 x0 :
> > 0000000000000000
> > [ 1.051749] Call trace:
> > [ 1.054199] kobject_set_name_vargs+0x10/0xd0
> > [ 1.058574] dev_set_name+0x58/0x80
> > [ 1.062072] imx8mp_blk_ctrl_probe+0x5c0/0x660
> > [ 1.066534] platform_probe+0x64/0x100
> > [ 1.070297] call_driver_probe+0x28/0x140
> > [ 1.074322] really_probe+0xc0/0x334
> > [ 1.077909] __driver_probe_device+0x84/0x144
> > [ 1.082284] driver_probe_device+0x38/0x130
> > [ 1.086486] __driver_attach+0xac/0x244
> > [ 1.090334] bus_for_each_dev+0x6c/0xc0
> > [ 1.094184] driver_attach+0x20/0x30
> > [ 1.097772] bus_add_driver+0x174/0x244
> > [ 1.101622] driver_register+0x74/0x120
> > [ 1.105474] __platform_driver_register+0x24/0x30
> > [ 1.110197] imx8mp_blk_ctrl_driver_init+0x18/0x20
> > [ 1.115009] do_one_initcall+0x58/0x200
> > [ 1.118861] do_initcalls+0x164/0x19c
> > [ 1.122534] kernel_init_freeable+0x134/0x17c
> > [ 1.126909] kernel_init+0x2c/0x150
> > [ 1.130411] ret_from_fork+0x10/0x20
> > [ 1.134003] Code: a9bb7bfd 910003fd a90153f3 aa0003f3 (f9400000)
> > [ 1.140127] ---[ end trace 0000000000000000 ]---
> >
> > Adding some debug out shows:
> > [ 0.866795] imx8mp-blk-ctrl 32fc0000.blk-ctrl: domain->power_dev: 0x0
> > [ 0.873257] imx8mp-blk-ctrl 32fc0000.blk-ctrl: data->name: hdmiblk-hdcp
> > [ 0.879905] imx8mp-blk-ctrl 32fc0000.blk-ctrl: data->gpc_name: hdcp
> >
> > AFAICS the power domains 'hrv' and 'hdcp' are missing in the
> > 'hdmi_blk_ctrl: blk-ctrl at 32fc0000' node thus resulting in a NULL pointer
> > from calling dev_pm_domain_attach_by_name().
>
> The HDMI blk ctrl dts not landed in Shawn's branch, could you share me
> your dts change?
I don't have any dts changes for this matter. To get a bootable device, for
now, I just removed the IMX8MP_HDMIBLK_PD_HRV and IMX8MP_HDMIBLK_PD_HDCP power
domains from imx8mp_hdmi_domain_data.
> And dev_set_name, as I recall, Lucas has a patch to remove that.
Is this removal a fix or just a workaround?
Best regards,
Alexander
More information about the linux-arm-kernel
mailing list