[PATCH] kselftest/arm64: Install signal handlers before output in FP stress tests

[Mark Brown]

To interface more robustly with other processes install the signal handers
in the floating point stress tests before we produce any output, this
means that a parent process can know that if it has seen any output from
the test then the test is ready to handle incoming signals.

Signed-off-by: Mark Brown <broonie at kernel.org>
---

Resending with signoff added, was missed on previous postings.

 .../testing/selftests/arm64/fp/fpsimd-test.S  | 48 +++++++++----------
 tools/testing/selftests/arm64/fp/sve-test.S   | 48 +++++++++----------
 tools/testing/selftests/arm64/fp/za-test.S    | 48 +++++++++----------
 3 files changed, 72 insertions(+), 72 deletions(-)

diff --git a/tools/testing/selftests/arm64/fp/fpsimd-test.S b/tools/testing/selftests/arm64/fp/fpsimd-test.S
index f0f92192351a..918d04885a33 100644
--- a/tools/testing/selftests/arm64/fp/fpsimd-test.S
+++ b/tools/testing/selftests/arm64/fp/fpsimd-test.S
@@ -216,6 +216,30 @@ endfunction
 .globl _start
 function _start
 _start:
+	mov	x23, #0		// signal count
+
+	mov	w0, #SIGINT
+	adr	x1, terminate_handler
+	mov	w2, #SA_SIGINFO
+	bl	setsignal
+
+	mov	w0, #SIGTERM
+	adr	x1, terminate_handler
+	mov	w2, #SA_SIGINFO
+	bl	setsignal
+
+	mov	w0, #SIGUSR1
+	adr	x1, irritator_handler
+	mov	w2, #SA_SIGINFO
+	orr	w2, w2, #SA_NODEFER
+	bl	setsignal
+
+	mov	w0, #SIGUSR2
+	adr	x1, tickle_handler
+	mov	w2, #SA_SIGINFO
+	orr	w2, w2, #SA_NODEFER
+	bl	setsignal
+
 	// Sanity-check and report the vector length
 
 	mov	x19, #128
@@ -246,30 +270,6 @@ _start:
 	mov	x0, x20
 	bl	putdecn
 
-	mov	x23, #0		// Irritation signal count
-
-	mov	w0, #SIGINT
-	adr	x1, terminate_handler
-	mov	w2, #SA_SIGINFO
-	bl	setsignal
-
-	mov	w0, #SIGTERM
-	adr	x1, terminate_handler
-	mov	w2, #SA_SIGINFO
-	bl	setsignal
-
-	mov	w0, #SIGUSR1
-	adr	x1, irritator_handler
-	mov	w2, #SA_SIGINFO
-	orr	w2, w2, #SA_NODEFER
-	bl	setsignal
-
-	mov	w0, #SIGUSR2
-	adr	x1, tickle_handler
-	mov	w2, #SA_SIGINFO
-	orr	w2, w2, #SA_NODEFER
-	bl	setsignal
-
 	mov	x22, #0		// generation number, increments per iteration
 .Ltest_loop:
 
diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S
index 79c56e6c5b23..2a18cb4c528c 100644
--- a/tools/testing/selftests/arm64/fp/sve-test.S
+++ b/tools/testing/selftests/arm64/fp/sve-test.S
@@ -379,6 +379,30 @@ endfunction
 .globl _start
 function _start
 _start:
+	mov	x23, #0		// Irritation signal count
+
+	mov	w0, #SIGINT
+	adr	x1, terminate_handler
+	mov	w2, #SA_SIGINFO
+	bl	setsignal
+
+	mov	w0, #SIGTERM
+	adr	x1, terminate_handler
+	mov	w2, #SA_SIGINFO
+	bl	setsignal
+
+	mov	w0, #SIGUSR1
+	adr	x1, irritator_handler
+	mov	w2, #SA_SIGINFO
+	orr	w2, w2, #SA_NODEFER
+	bl	setsignal
+
+	mov	w0, #SIGUSR2
+	adr	x1, tickle_handler
+	mov	w2, #SA_SIGINFO
+	orr	w2, w2, #SA_NODEFER
+	bl	setsignal
+
 #ifdef SSVE
 	puts	"Streaming mode "
 	smstart_sm
@@ -414,30 +438,6 @@ _start:
 	mov	x0, x20
 	bl	putdecn
 
-	mov	x23, #0		// Irritation signal count
-
-	mov	w0, #SIGINT
-	adr	x1, terminate_handler
-	mov	w2, #SA_SIGINFO
-	bl	setsignal
-
-	mov	w0, #SIGTERM
-	adr	x1, terminate_handler
-	mov	w2, #SA_SIGINFO
-	bl	setsignal
-
-	mov	w0, #SIGUSR1
-	adr	x1, irritator_handler
-	mov	w2, #SA_SIGINFO
-	orr	w2, w2, #SA_NODEFER
-	bl	setsignal
-
-	mov	w0, #SIGUSR2
-	adr	x1, tickle_handler
-	mov	w2, #SA_SIGINFO
-	orr	w2, w2, #SA_NODEFER
-	bl	setsignal
-
 #ifdef SSVE
 	smstart_sm		// syscalls will have exited streaming mode
 #endif
diff --git a/tools/testing/selftests/arm64/fp/za-test.S b/tools/testing/selftests/arm64/fp/za-test.S
index 901839107205..53c54af65704 100644
--- a/tools/testing/selftests/arm64/fp/za-test.S
+++ b/tools/testing/selftests/arm64/fp/za-test.S
@@ -232,6 +232,30 @@ endfunction
 .globl _start
 function _start
 _start:
+	mov	x23, #0		// signal count
+
+	mov	w0, #SIGINT
+	adr	x1, terminate_handler
+	mov	w2, #SA_SIGINFO
+	bl	setsignal
+
+	mov	w0, #SIGTERM
+	adr	x1, terminate_handler
+	mov	w2, #SA_SIGINFO
+	bl	setsignal
+
+	mov	w0, #SIGUSR1
+	adr	x1, irritator_handler
+	mov	w2, #SA_SIGINFO
+	orr	w2, w2, #SA_NODEFER
+	bl	setsignal
+
+	mov	w0, #SIGUSR2
+	adr	x1, tickle_handler
+	mov	w2, #SA_SIGINFO
+	orr	w2, w2, #SA_NODEFER
+	bl	setsignal
+
 	puts	"Streaming mode "
 	smstart_za
 
@@ -264,30 +288,6 @@ _start:
 	mov	x0, x20
 	bl	putdecn
 
-	mov	x23, #0		// Irritation signal count
-
-	mov	w0, #SIGINT
-	adr	x1, terminate_handler
-	mov	w2, #SA_SIGINFO
-	bl	setsignal
-
-	mov	w0, #SIGTERM
-	adr	x1, terminate_handler
-	mov	w2, #SA_SIGINFO
-	bl	setsignal
-
-	mov	w0, #SIGUSR1
-	adr	x1, irritator_handler
-	mov	w2, #SA_SIGINFO
-	orr	w2, w2, #SA_NODEFER
-	bl	setsignal
-
-	mov	w0, #SIGUSR2
-	adr	x1, tickle_handler
-	mov	w2, #SA_SIGINFO
-	orr	w2, w2, #SA_NODEFER
-	bl	setsignal
-
 	mov	x22, #0		// generation number, increments per iteration
 .Ltest_loop:
 	rdsvl	0, 8
-- 
2.30.2