[PATCH v3 2/3] remoteproc/keystone: Add a remoteproc driver for Keystone 2 DSPs

[Dmitry Torokhov]

Hi,

On Mon, Jun 26, 2017 at 8:55 AM Suman Anna <s-anna at ti.com> wrote:
>
> Hi Bjorn,
>
> On 06/25/2017 03:15 PM, Bjorn Andersson wrote:
> > On Tue 13 Jun 16:45 PDT 2017, Suman Anna wrote:
> >
> >> +static int keystone_rproc_start(struct rproc *rproc)
> >> +{
> >> +    struct keystone_rproc *ksproc = rproc->priv;
> >> +    int ret;
> >> +
> >> +    INIT_WORK(&ksproc->workqueue, handle_event);
> >> +
> >> +    ret = request_irq(ksproc->irq_ring, keystone_rproc_vring_interrupt, 0,
> >> +                      dev_name(ksproc->dev), ksproc);
> >> +    if (ret) {
> >> +            dev_err(ksproc->dev, "failed to enable vring interrupt, ret = %d\n",
> >> +                    ret);
> >> +            goto out;
> >> +    }
> >> +
> >> +    ret = request_irq(ksproc->irq_fault, keystone_rproc_exception_interrupt,
> >> +                      0, dev_name(ksproc->dev), ksproc);
> >> +    if (ret) {
> >> +            dev_err(ksproc->dev, "failed to enable exception interrupt, ret = %d\n",
> >> +                    ret);
> >> +            goto free_vring_irq;
> >> +    }
> >
> > I do prefer that your request any resources during probe() and
> > potentially enable/disable them here. If below concern about using a
> > GPIO driver is cleared already I'll take it as is though.
> >
> > [..]
> >> +static void keystone_rproc_kick(struct rproc *rproc, int vqid)
> >> +{
> >> +    struct keystone_rproc *ksproc = rproc->priv;
> >> +
> >> +    if (WARN_ON(ksproc->kick_gpio < 0))
> >> +            return;
> >> +
> >> +    gpio_set_value(ksproc->kick_gpio, 1);
> >> +}
> >> +
> >
> > This doesn't sound like a gpio-controller and the GPIO maintainer did
> > reject an attempt by me to use the GPIO framework to abstract a similar
> > thing. Do you already have this driver upstream or have you clarified
> > with the maintainer that the GPIO framework is an acceptable abstraction
> > for this?
>
> Yeah, this has been upstream since quite some time. See commit
> 2134cb997f2f ("gpio: syscon: reuse for keystone 2 socs").

Sorry for the thread necromancy, but was it intentional that the
driver only parses DT to find this "GPIO" but never requests/reserves
it? I would like to drop of_get_named_gpio_flags() in favor of a more
standard dev_get_gpiod().

Thanks.

-- 
Dmitry