[PATCH 1/2] arm64: dts: imx8mp-verdin: add dsi to hdmi functionality

[Laurent Pinchart]

Hi Francesco,

On Mon, Sep 05, 2022 at 11:17:03PM +0200, Francesco Dolcini wrote:
> On Mon, Sep 05, 2022 at 10:26:14PM +0300, Laurent Pinchart wrote:
> > On Sat, Sep 03, 2022 at 02:47:43PM +0200, Francesco Dolcini wrote:
> > > On Sat, Sep 03, 2022 at 03:24:51AM +0300, Laurent Pinchart wrote:
> > > > On Fri, Sep 02, 2022 at 05:57:20PM +0200, Francesco Dolcini wrote:
> > > > > On Thu, Sep 01, 2022 at 09:07:49PM +0300, Laurent Pinchart wrote:
> > > > Someone can integrate a Verdin SoM with a carrier board that has no DSI
> > > > to HDMI (or LVDS) bridge, there should thus be no such device in the
> > > > device tree. The SoM has DSI signals present on its connector, that's
> > > > what the SoM .dtsi should expose.
> > > 
> > > Just for the record Verdin i.MX8M Plus do have both HDMI and LVDS on the
> > > connector (in addition to DSI) [1], of course we do have also the option to
> > > have LVDS or HDMI using an external add-on DSI bridge as this patches are
> > > about.
> > > 
> > > Said that it's true that sometime we describe peripherals that are part of the
> > > SOM family into the SOM dtsi, this avoid quite a lot of duplications given the
> > > amount of carrier board that are available on the market that use just the same
> > > building blocks (and this was one of the 2 points I mentioned as a reasoning
> > > for our current DTS files structure).
> > 
> > If those "SoM family" peripherals are on the carrier board, what's the
> > issue with describing them in the carrier board .dtsi ? And if they're
> > on an add-on board (such as, if I understand correctly, the DSI to HDMI
> > encoder for the Dahlia carrier board), what's the issue with describing
> > them in an overlay ?
> 
> These SOM family peripherals are in multiples(!) carrier boards AND on
> accessories. The drawback of being strict as you are asking is that we
> would end-up with a massive duplication of this small DTS building
> blocks, therefore the decision in the past to put those in the base SOM
> dtsi file.

OK, I got it now.

> Maybe adding something like imx8mp-verdin-dsi-hdmi.dtsi and
> imx8mp-verdin-dsi-lvds.dtsi that can be included by both overlay and
> carrier dts files as needed would solve both the need of being strict on
> the board definition in the dts file and avoid duplications?
> Not sure if that would work smoothly, it looks like adding some
> complexity and maintenance overhead, but maybe is the correct solution.

That sounds good to me. Would you be able to give it a try to see if it
works well ?

> Anyway, while I fully understand your reasoning, I'm still not happy to
> change this for the current toradex products, since users of
> our dts file currently rely on the expectations I tried to explain in
> this email thread and Max patches are implementing (and this is
> currently uniform over the whole toradex product range).

This sounds like a broader question, not specific to Toradex, opinions
from Rob and Krzysztof would be useful.

> > Maybe I'm missing something ?
> 
> I tried to give more insights.

Thank you, that's very appreciated.

-- 
Regards,

Laurent Pinchart