[PATCH] clk: iproc: Do not rely on node name for correct PLL setup

Rafał Miłecki rafal at milecki.pl
Mon Sep 5 00:16:31 PDT 2022


On 2022-08-03 04:58, Florian Fainelli wrote:
> After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block
> description") a warning from clk-iproc-pll.c was generated due to a
> duplicate PLL name as well as the console stopped working. Upon closer
> inspection it became clear that iproc_pll_clk_setup() used the Device
> Tree node unit name as an unique identifier as well as a parent name to
> parent all clocks under the PLL.
> 
> BCM5301X was the first platform on which that got noticed because of 
> the
> DT node unit name renaming but the same assumptions hold true for any
> user of the iproc_pll_clk_setup() function.
> 
> The first 'clock-output-names' property is always guaranteed to be
> unique as well as providing the actual desired PLL clock name, so we
> utilize that to register the PLL and as a parent name of all children
> clock.
> 
> Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>

One nitpick below.


> ---
> Rafal,
> 
> This is a replacement for this patch that you checked into OpenWrt:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/bcm53xx/patches-5.15/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch;h=cee37732ab9e2ac8bc2a399a53d01b9ead756cb8;hb=HEAD
> 
> 
>  drivers/clk/bcm/clk-iproc-pll.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/bcm/clk-iproc-pll.c 
> b/drivers/clk/bcm/clk-iproc-pll.c
> index 33da30f99c79..92be88eb1d11 100644
> --- a/drivers/clk/bcm/clk-iproc-pll.c
> +++ b/drivers/clk/bcm/clk-iproc-pll.c
> @@ -736,6 +736,7 @@ void iproc_pll_clk_setup(struct device_node *node,
>  	const char *parent_name;
>  	struct iproc_clk *iclk_array;
>  	struct clk_hw_onecell_data *clk_data;
> +	const char *clk_name;
> 
>  	if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl))
>  		return;
> @@ -783,7 +784,12 @@ void iproc_pll_clk_setup(struct device_node *node,
>  	iclk = &iclk_array[0];
>  	iclk->pll = pll;
> 
> -	init.name = node->name;
> +	ret = of_property_read_string_index(node, "clock-output-names",
> +					    0, &clk_name);
> +	if (WARN_ON(ret))
> +		goto err_pll_register;
> +
> +	init.name = clk_name;
>  	init.ops = &iproc_pll_ops;
>  	init.flags = 0;
>  	parent_name = of_clk_get_parent_name(node, 0);
> @@ -803,13 +809,12 @@ void iproc_pll_clk_setup(struct device_node 
> *node,
>  		goto err_pll_register;
> 
>  	clk_data->hws[0] = &iclk->hw;
> +	parent_name = clk_name;
> 
>  	/* now initialize and register all leaf clocks */
>  	for (i = 1; i < num_clks; i++) {
> -		const char *clk_name;
> 
>  		memset(&init, 0, sizeof(init));

You could probably get rid of that empty line above memset().


> -		parent_name = node->name;
> 
>  		ret = of_property_read_string_index(node, "clock-output-names",
>  						    i, &clk_name);



More information about the linux-arm-kernel mailing list