[PATCH V4 0/8] arm64: dts: imx93: add several nodes

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

V4:
  Per Rob's comment, use syscon.yaml for i.MX93 aonmix/wakeupmix blk ctrl.
  Drop status okay in s4mu node in patch 4 per Shawn's comment.

V3:
 Address DT maintainer's comments in patch 1

V2:
 Add binding doc for aonmix/wakeupmix blk ctrl
 Update compatible in patch 5 according to binding doc
 The lpi2c binding doc has been accepted:
   https://lore.kernel.org/all/Yw3hfcQ2JV248GIo@shikoro/

V1:
Add S4MU, BLK CTRL, PMU, LPI2C, LPSPI nodes.
Add GPIO clk entry.
Correct SDHC clk entry
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220812074609.53131-1-peng.fan@oss.nxp.com/

Peng Fan (8):
  dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
  arm64: dts: imx93: correct SDHC clk entry
  arm64: dts: imx93: add gpio clk
  arm64: dts: imx93: add s4 mu node
  arm64: dts: imx93: add blk ctrl node
  arm64: dts: imx93: add a55 pmu
  arm64: dts: imx93: add lpi2c nodes
  arm64: dts: imx93: add lpspi nodes

 .../devicetree/bindings/mfd/syscon.yaml       |   2 +
 arch/arm64/boot/dts/freescale/imx93.dtsi      | 161 +++++++++++++++++-
 2 files changed, 157 insertions(+), 6 deletions(-)

-- 
2.37.1