[PATCH v1 2/5] ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines

[Shawn Guo]

On Fri, Aug 26, 2022 at 09:22:49PM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> This fixes the following warning:
> 
> arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple
> blank lines

It includes changes more than multiple blank lines fix.  I mentioned
those indent changes a bit in the commit log.

> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Applied, thanks!

Shawn

> ---
> 
>  arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> index 35861bbea94e..c84ea1fac5e9 100644
> --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> @@ -226,7 +226,7 @@ lcdc: endpoint {
>  &iomuxc {
>  	pinctrl_bt_reg: btreggrp {
>  		fsl,pins =
> -			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
> +			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
>  	};
>  
>  	pinctrl_enet1: enet1grp {
> @@ -306,7 +306,6 @@ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
>  		>;
>  	};
>  
> -
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins =
>  			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
> @@ -347,24 +346,23 @@ pinctrl_uart6: uart6grp {
>  
>  	pinctrl_otg1_reg: otg1grp {
>  		fsl,pins =
> -			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
> +			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
>  	};
>  
> -
>  	pinctrl_otg2_reg: otg2grp {
>  		fsl,pins =
> -			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
> +			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
>  	};
>  
>  	pinctrl_usb_otg1: usbotg1grp {
>  		fsl,pins =
> -			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
> -			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
> +			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
> +			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
>  	};
>  
>  	pinctrl_usb_otg2: usbot2ggrp {
>  		fsl,pins =
> -			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
> +			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
>  	};
>  
>  	pinctrl_usdhc2: usdhc2grp {
> -- 
> 2.36.1
>