[PATCH 0/4] ARM: footbridge: cleanups
Russell King (Oracle)
linux at armlinux.org.uk
Sun Sep 4 05:09:42 PDT 2022
On Sun, Sep 04, 2022 at 12:43:48PM +0100, Marc Zyngier wrote:
> On Thu, 18 Aug 2022 22:15:46 +0100,
> Arnd Bergmann <arnd at kernel.org> wrote:
> >
> > From: Arnd Bergmann <arnd at arndb.de>
> >
> > I had an older patch to remove the addin mode for footbridge,
> > which nobody is using any more, and I found a few other small
> > cleanups that are worth doing here.
> >
> > Footbridge is now the only platform with a custom __virt_to_bus()
> > for ISA DMA, and a custom phys_to_dma() for PCI devices. Both
> > just add a fixed offset, so there is probably a better way
> > of doing the same without a custom helper function.
> >
> > Arnd
> >
> > Arnd Bergmann (4):
> > ARM: footbridge: remove addin mode
> > ARM: footbridge: remove leftover from personal-server
> > ARM: footbridge: move isa-dma support into footbridge
> > ARM: footbridge: limit CONFIG_ISA to CATS
> >
> > arch/arm/Kconfig | 5 --
> > arch/arm/include/asm/hardware/dec21285.h | 13 ----
> > arch/arm/kernel/Makefile | 1 -
> > arch/arm/mach-footbridge/Kconfig | 30 +-------
> > arch/arm/mach-footbridge/Makefile | 5 +-
> > arch/arm/mach-footbridge/common.c | 73 ++-----------------
> > arch/arm/mach-footbridge/dc21285.c | 61 +++++-----------
> > .../arm/{kernel => mach-footbridge}/dma-isa.c | 7 +-
> > arch/arm/mach-footbridge/dma.c | 58 ---------------
> > .../mach-footbridge/include/mach/isa-dma.h | 14 +---
> > .../arm/mach-footbridge/include/mach/memory.h | 22 ------
> > arch/arm/mach-footbridge/isa.c | 14 ++--
> > drivers/tty/serial/21285.c | 3 -
> > 13 files changed, 42 insertions(+), 264 deletions(-)
> > rename arch/arm/{kernel => mach-footbridge}/dma-isa.c (98%)
> > delete mode 100644 arch/arm/mach-footbridge/dma.c
> >
> > --
> > 2.29.2
> >
> > Cc: Russell King <linux at armlinux.org.uk>
> > Cc: Christoph Hellwig <hch at lst.de>
> > Cc: Linus Walleij <linus.walleij at linaro.org>
> > Cc: Marc Zyngier <maz at kernel.org>
>
> I finally managed to give this a go on my netwinder using v2 of patch
> 5/4 (!), and the box booted nicely.
>
> Note that apart from the serial console, everything I'm using on this
> box is PCI (I tried to enable sound and failed, probably because I
> can't select CONFIG_ISA anymore on this machine).
That tends to mean, therefore, that the statement "CONFIG_ISA is for
add-in cards" is wrong, because it's caused a user-visible regression
by killing sound support on Netwinders!
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
More information about the linux-arm-kernel
mailing list