[PATCH] ARM: dts: armada-38x: Add gpio-ranges for pin muxing

[Gregory CLEMENT]

Pali Rohár <pali at kernel.org> writes:

> GPIOs are configured by pinmux driver, so add corresponding references.
>
> Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  arch/arm/boot/dts/armada-38x.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index a176898944f7..1590143c52c8 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -298,6 +298,7 @@
>  				reg-names = "gpio", "pwm";
>  				ngpios = <32>;
>  				gpio-controller;
> +				gpio-ranges = <&pinctrl 0 0 32>;
>  				#gpio-cells = <2>;
>  				#pwm-cells = <2>;
>  				interrupt-controller;
> @@ -316,6 +317,7 @@
>  				reg-names = "gpio", "pwm";
>  				ngpios = <28>;
>  				gpio-controller;
> +				gpio-ranges = <&pinctrl 0 32 28>;
>  				#gpio-cells = <2>;
>  				#pwm-cells = <2>;
>  				interrupt-controller;
> -- 
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com