[PATCH 1/2] arm64: dts: imx8mp-verdin: add dsi to hdmi functionality

[Max Krummenacher]

From: Max Krummenacher <max.krummenacher at toradex.com>

Add the hdmi connector present on the dsi to hdmi adapter now
required by the upstream lontium bridge driver.
The dsi to hdmi adapter is enabled in an device tree overlay.

Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>

---

 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 76cc89296150..bd84a0d135dc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -59,6 +59,14 @@ button-wakeup {
 		};
 	};
 
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		label = "hdmi";
+		type = "a";
+		status = "disabled";
+	};
+
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
-- 
2.35.3