[PATCH RESEND 3/6] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Vignesh Raghavendra
vigneshr at ti.com
Thu Sep 1 01:48:43 PDT 2022
On 10/08/22 15:09, Matt Ranostay wrote:
> From: Aswath Govindraju <a-govindraju at ti.com>
>
> Add support for two instance of OSPI in J721S2 SoC.
>
> Cc: Vignesh Raghavendra <vigneshr at ti.com>
> Cc: Nishanth Menon <nm at ti.com>
> Acked-by: Matt Ranostay <mranostay at ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> ---
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 4d1bfabd1313..7bc268f27030 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -299,4 +299,44 @@ cpts at 3d000 {
> ti,cpts-periodic-outputs = <2>;
> };
> };
> +
> + fss: syscon at 47000000 {
> + compatible = "syscon", "simple-mfd";
please add "ti,j721e-system-controller"
> + reg = <0x0 0x47000000 0x0 0x100>;
s/0x0/0x00 to be consistent with file
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + ospi0: spi at 47040000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47040000 0x00 0x100>,
> + <0x5 0x0000000 0x1 0x0000000>;
> + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 109 5>;
> + assigned-clocks = <&k3_clks 109 5>;
> + assigned-clock-parents = <&k3_clks 109 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ospi1: spi at 47050000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47050000 0x00 0x100>,
> + <0x7 0x0000000 0x1 0x0000000>;
> + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 110 5>;
> + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + };
> };
--
Regards
Vignesh
More information about the linux-arm-kernel
mailing list