[PATCH 5/5] net: stmmac: Add NXP S32 SoC family support

Andrew Lunn andrew at lunn.ch
Mon Oct 31 06:27:17 PDT 2022


> +	/* set interface mode */
> +	if (gmac->ctrl_sts) {
> +		switch (gmac->intf_mode) {
> +		default:
> +			dev_info(&pdev->dev, "unsupported mode %u, set the default phy mode.\n",
> +				 gmac->intf_mode);

If it is an unsupported mode use dev_err() and return -EINVAL;

> +			fallthrough;
> +		case PHY_INTERFACE_MODE_SGMII:
> +			dev_info(&pdev->dev, "phy mode set to SGMII\n");

dev_dbg()

Please don't spam the lock with useless information.

> +			intf_sel = PHY_INTF_SEL_SGMII;
> +			break;
> +		case PHY_INTERFACE_MODE_RGMII:
> +		case PHY_INTERFACE_MODE_RGMII_ID:
> +		case PHY_INTERFACE_MODE_RGMII_TXID:
> +		case PHY_INTERFACE_MODE_RGMII_RXID:
> +			dev_info(&pdev->dev, "phy mode set to RGMII\n");

dev_dbg()

> +			intf_sel = PHY_INTF_SEL_RGMII;
> +			break;
> +		case PHY_INTERFACE_MODE_RMII:
> +			dev_info(&pdev->dev, "phy mode set to RMII\n");

dev_dbg()

> +			intf_sel = PHY_INTF_SEL_RMII;
> +			break;
> +		case PHY_INTERFACE_MODE_MII:
> +			dev_info(&pdev->dev, "phy mode set to MII\n");

dev_dbg()

> +			intf_sel = PHY_INTF_SEL_MII;
> +			break;
> +		}
> +
> +		writel(intf_sel, gmac->ctrl_sts);
> +	}
> +
> +	return 0;
> +}
> +
> +static int s32cc_config_cache_coherency(struct platform_device *pdev,
> +					struct plat_stmmacenet_data *plat_dat)
> +{
> +	plat_dat->axi4_ace_ctrl =
> +		devm_kzalloc(&pdev->dev,
> +			     sizeof(struct stmmac_axi4_ace_ctrl),
> +			     GFP_KERNEL);
> +
> +	if (!plat_dat->axi4_ace_ctrl) {
> +		dev_info(&pdev->dev, "Fail to allocate axi4_ace_ctrl\n");

dev_err(). But devm_kzalloc() failing will produce log messages, so
you probably don't need this.

    Andrew



More information about the linux-arm-kernel mailing list