[PATCH] ARM: dts: stm32: Fix AV96 WLAN regulator gpio property

[Alexandre TORGUE]

Hi Marek

On 10/21/22 12:00, Marek Vasut wrote:
> The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
> regulator enable GPIO. While the former is also currently handled by
> the Linux kernel regulator-fixed driver, the later is the correct one
> per DT bindings. Update the DT to use the later.
> 
> Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
>   arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
> index 305f9ae2fcebf..50af4a27d6be4 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
> @@ -99,7 +99,7 @@ wlan_pwr: regulator-wlan {
>   		regulator-min-microvolt = <3300000>;
>   		regulator-max-microvolt = <3300000>;
>   
> -		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
> +		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
>   		enable-active-high;
>   	};
>   };

Applied on stm32-next.

Alex