[PATCH 07/12] arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level

Andrew Davis afd at ti.com
Thu Oct 20 09:03:00 PDT 2022


UART nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the UART nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 38 ++-----------------
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 10 +++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  2 +
 3 files changed, 16 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c5395..9f1a0ca4dc372 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -219,49 +219,19 @@ &wkup_uart0 {
 	status = "reserved";
 };
 
-&main_uart0 {
-	status = "disabled";
-};
-
-&main_uart1 {
-	status = "disabled";
-};
-
-&main_uart2 {
-	status = "disabled";
-};
-
-&main_uart3 {
-	status = "disabled";
-};
-
-&main_uart4 {
-	status = "disabled";
-};
-
-&main_uart5 {
-	status = "disabled";
-};
-
-&main_uart6 {
-	status = "disabled";
-};
-
-&main_uart7 {
-	status = "disabled";
+&mcu_uart0 {
+	status = "okay";
+	/* Default pinmux */
 };
 
 &main_uart8 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart8_pins_default>;
 	/* Shared with TFA on this platform */
 	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
 };
 
-&main_uart9 {
-	status = "disabled";
-};
-
 &main_i2c0 {
 	clock-frequency = <400000>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 34e7d577ae13b..7267a7b665ce8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -80,6 +80,7 @@ main_uart0: serial at 2800000 {
 		clocks = <&k3_clks 146 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart1: serial at 2810000 {
@@ -90,6 +91,7 @@ main_uart1: serial at 2810000 {
 		clocks = <&k3_clks 350 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart2: serial at 2820000 {
@@ -100,6 +102,7 @@ main_uart2: serial at 2820000 {
 		clocks = <&k3_clks 351 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart3: serial at 2830000 {
@@ -110,6 +113,7 @@ main_uart3: serial at 2830000 {
 		clocks = <&k3_clks 352 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart4: serial at 2840000 {
@@ -120,6 +124,7 @@ main_uart4: serial at 2840000 {
 		clocks = <&k3_clks 353 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart5: serial at 2850000 {
@@ -130,6 +135,7 @@ main_uart5: serial at 2850000 {
 		clocks = <&k3_clks 354 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart6: serial at 2860000 {
@@ -140,6 +146,7 @@ main_uart6: serial at 2860000 {
 		clocks = <&k3_clks 355 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart7: serial at 2870000 {
@@ -150,6 +157,7 @@ main_uart7: serial at 2870000 {
 		clocks = <&k3_clks 356 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart8: serial at 2880000 {
@@ -160,6 +168,7 @@ main_uart8: serial at 2880000 {
 		clocks = <&k3_clks 357 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_uart9: serial at 2890000 {
@@ -170,6 +179,7 @@ main_uart9: serial at 2890000 {
 		clocks = <&k3_clks 358 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_gpio0: gpio at 600000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313a..3de4218e8e125 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -91,6 +91,7 @@ wkup_uart0: serial at 42300000 {
 		clocks = <&k3_clks 359 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_uart0: serial at 40a00000 {
@@ -101,6 +102,7 @@ mcu_uart0: serial at 40a00000 {
 		clocks = <&k3_clks 149 3>;
 		clock-names = "fclk";
 		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	wkup_gpio0: gpio at 42110000 {
-- 
2.37.3




More information about the linux-arm-kernel mailing list