[PATCH 34/44] serial: stm32: Use uart_xmit_advance()

[Ilpo Järvinen]

Take advantage of the new uart_xmit_advance() helper.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen at linux.intel.com>
---
 drivers/tty/serial/stm32-usart.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index dfdbcf092fac..24def72b2565 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -596,8 +596,7 @@ static void stm32_usart_transmit_chars_pio(struct uart_port *port)
 		if (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE))
 			break;
 		writel_relaxed(xmit->buf[xmit->tail], port->membase + ofs->tdr);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
+		uart_xmit_advance(port, 1);
 	}
 
 	/* rely on TXE irq (mask or unmask) for sending remaining data */
@@ -673,8 +672,8 @@ static void stm32_usart_transmit_chars_dma(struct uart_port *port)
 
 	stm32_usart_set_bits(port, ofs->cr3, USART_CR3_DMAT);
 
-	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
-	port->icount.tx += count;
+	uart_xmit_advance(port, count);
+
 	return;
 
 fallback_err:
-- 
2.30.2