[RFC PATCH v3 4/6] dpll: get source/output name
Jiri Pirko
jiri at resnulli.us
Mon Oct 10 02:45:55 PDT 2022
Mon, Oct 10, 2022 at 03:18:02AM CEST, vfedorenko at novek.ru wrote:
>From: Arkadiusz Kubalewski <arkadiusz.kubalewski at intel.com>
>
>Dump names of sources and outputs in response to DPLL_CMD_DEVICE_GET dump
>request.
>
>Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski at intel.com>
>---
> drivers/dpll/dpll_netlink.c | 24 ++++++++++++++++++++++++
> include/linux/dpll.h | 2 ++
> include/uapi/linux/dpll.h | 2 ++
> 3 files changed, 28 insertions(+)
>
>diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
>index a5779871537a..e3604c10b59e 100644
>--- a/drivers/dpll/dpll_netlink.c
>+++ b/drivers/dpll/dpll_netlink.c
>@@ -31,12 +31,16 @@ static const struct nla_policy dpll_genl_set_source_policy[] = {
> [DPLLA_DEVICE_ID] = { .type = NLA_U32 },
> [DPLLA_SOURCE_ID] = { .type = NLA_U32 },
> [DPLLA_SOURCE_TYPE] = { .type = NLA_U32 },
>+ [DPLLA_SOURCE_NAME] = { .type = NLA_STRING,
>+ .len = DPLL_NAME_LENGTH },
> };
>
> static const struct nla_policy dpll_genl_set_output_policy[] = {
> [DPLLA_DEVICE_ID] = { .type = NLA_U32 },
> [DPLLA_OUTPUT_ID] = { .type = NLA_U32 },
> [DPLLA_OUTPUT_TYPE] = { .type = NLA_U32 },
>+ [DPLLA_OUTPUT_NAME] = { .type = NLA_STRING,
>+ .len = DPLL_NAME_LENGTH },
> };
>
> static const struct nla_policy dpll_genl_set_src_select_mode_policy[] = {
>@@ -100,6 +104,7 @@ static int __dpll_cmd_dump_sources(struct dpll_device *dpll,
> {
> int i, ret = 0, type, prio;
> struct nlattr *src_attr;
>+ const char *name;
>
> for (i = 0; i < dpll->sources_count; i++) {
> src_attr = nla_nest_start(msg, DPLLA_SOURCE);
>@@ -132,6 +137,15 @@ static int __dpll_cmd_dump_sources(struct dpll_device *dpll,
> break;
> }
> }
>+ if (dpll->ops->get_source_name) {
>+ name = dpll->ops->get_source_name(dpll, i);
>+ if (name && nla_put_string(msg, DPLLA_SOURCE_NAME,
>+ name)) {
>+ nla_nest_cancel(msg, src_attr);
>+ ret = -EMSGSIZE;
>+ break;
>+ }
>+ }
> nla_nest_end(msg, src_attr);
> }
>
>@@ -143,6 +157,7 @@ static int __dpll_cmd_dump_outputs(struct dpll_device *dpll,
> {
> struct nlattr *out_attr;
> int i, ret = 0, type;
>+ const char *name;
>
> for (i = 0; i < dpll->outputs_count; i++) {
> out_attr = nla_nest_start(msg, DPLLA_OUTPUT);
>@@ -167,6 +182,15 @@ static int __dpll_cmd_dump_outputs(struct dpll_device *dpll,
> }
> ret = 0;
> }
>+ if (dpll->ops->get_output_name) {
>+ name = dpll->ops->get_output_name(dpll, i);
>+ if (name && nla_put_string(msg, DPLLA_OUTPUT_NAME,
>+ name)) {
>+ nla_nest_cancel(msg, out_attr);
>+ ret = -EMSGSIZE;
>+ break;
>+ }
>+ }
> nla_nest_end(msg, out_attr);
> }
>
>diff --git a/include/linux/dpll.h b/include/linux/dpll.h
>index 3fe957a06b90..2f4964dc28f0 100644
>--- a/include/linux/dpll.h
>+++ b/include/linux/dpll.h
>@@ -23,6 +23,8 @@ struct dpll_device_ops {
> int (*set_output_type)(struct dpll_device *dpll, int id, int val);
> int (*set_source_select_mode)(struct dpll_device *dpll, int mode);
> int (*set_source_prio)(struct dpll_device *dpll, int id, int prio);
>+ const char *(*get_source_name)(struct dpll_device *dpll, int id);
>+ const char *(*get_output_name)(struct dpll_device *dpll, int id);
Hmm, why you exactly need the name for?
> };
>
> struct dpll_device *dpll_device_alloc(struct dpll_device_ops *ops, const char *name,
>diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
>index f6b674e5cf01..8782d3425aae 100644
>--- a/include/uapi/linux/dpll.h
>+++ b/include/uapi/linux/dpll.h
>@@ -26,11 +26,13 @@ enum dpll_genl_attr {
> DPLLA_SOURCE,
> DPLLA_SOURCE_ID,
> DPLLA_SOURCE_TYPE,
>+ DPLLA_SOURCE_NAME,
> DPLLA_SOURCE_SUPPORTED,
> DPLLA_SOURCE_PRIO,
> DPLLA_OUTPUT,
> DPLLA_OUTPUT_ID,
> DPLLA_OUTPUT_TYPE,
>+ DPLLA_OUTPUT_NAME,
> DPLLA_OUTPUT_SUPPORTED,
> DPLLA_STATUS,
> DPLLA_TEMP,
>--
>2.27.0
>
More information about the linux-arm-kernel
mailing list