[PATCH] drm/sun4i: Fix blend registers corruption for DE2.0/DE3.0

Roman Stratiienko r.stratiienko at gmail.com
Tue May 24 10:10:06 PDT 2022


Please draft a test for the zpos issue you're mentioning.

It's very easy to do with kmsxx using python wrapper.

Or explain steps to reproduce here, I will write it by myself.

Thanks.
Regards
Roman

вт, 24 мая 2022 г. в 19:21, Jernej Škrabec <jernej.skrabec at gmail.com>:
>
> Dne torek, 24. maj 2022 ob 17:31:13 CEST je Roman Stratiienko napisal(a):
> > NAK for this. Further testing showed such an approach is not reliable
> > due to .atomic_update() callback called only in case planes have some
> > changes.
>
> Additionally, I think it would be better to fix underlaying zpos issue first
> (attempted many times) and then worry about blending.
>
> Best regards,
> Jernej
>
> >
> > вт, 24 мая 2022 г. в 16:52, Roman Stratiienko <r.stratiienko at gmail.com>:
> > >
> > > Corruption happens when plane zpos is updated
> > >
> > > Example scenario:
> > >
> > > Initial frame blender state:
> > >     PLANE_ZPOS = {0, 1, 2, 3}
> > >     BLD_ROUTE  = {0, 1, 2, 0}
> > >     BLD_EN     = {1, 1, 1, 0}
> > >
> > > New frame commit (Only ZPOS has been changed):
> > >
> > >     PLANE_ZPOS = {0->2, 1->0, 2->1, 3}
> > >
> > > Expected results after plane state update:
> > >                 Z0 Z1 Z2 Z3
> > >     BLD_ROUTE = {1, 2, 0, 0}
> > >     BLD_EN    = {1, 1, 1, 0}
> > >
> > > What is currently happening:
> > >
> > > 1. sun8i_vi_layer_enable(enabled=true, zpos=2, old_zpos=0):
> > >     BLD_ROUTE = {1->0, 1, 2->0, 0}
> > >     BLD_EN    = {1->0, 1, 1->1, 0}
> > >
> > > 2. sun8i_ui_layer_enable(enabled=true, zpos=0, old_zpos=1):
> > >     BLD_ROUTE = {0->1, 1->0, 0, 0}
> > >     BLD_EN    = {0->1, 1->0, 1, 0}
> > >
> > > 3. sun8i_ui_layer_enable(enabled=true, zpos=1, old_zpos=2):
> > >     BLD_ROUTE = {1, 0->2, 0->0, 0}
> > >     BLD_EN    = {1, 0->2, 1->0, 0}
> > >
> > > After updating of all the planes we are ending up with BLD_EN[2]=0,
> > > which makes this channel disabled.
> > >
> > > To fix this issue, clear BLEND registers before updating the planes
> > > and do not clear the old state while processing every plane.
> > >
> > > Signed-off-by: Roman Stratiienko <roman.o.stratiienko at globallogic.com>
> > > ---
> > >  drivers/gpu/drm/sun4i/sun8i_mixer.c    | 16 +++++++++++++++
> > >  drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 28 ++++----------------------
> > >  drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 28 ++++----------------------
> > >  3 files changed, 24 insertions(+), 48 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/
> sun8i_mixer.c
> > > index f5e8aeaa3cdf..004377a000fc 100644
> > > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > @@ -248,6 +248,21 @@ int sun8i_mixer_drm_format_to_hw(u32 format, u32
> *hw_format)
> > >         return -EINVAL;
> > >  }
> > >
> > > +static void sun8i_atomic_begin(struct sunxi_engine *engine,
> > > +                              struct drm_crtc_state *old_state)
> > > +{
> > > +       struct sun8i_mixer *mixer = engine_to_sun8i_mixer(engine);
> > > +       u32 bld_base = sun8i_blender_base(mixer);
> > > +
> > > +       regmap_write(engine->regs,
> > > +                    SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > +                    0);
> > > +
> > > +       regmap_write(engine->regs,
> > > +                    SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > +                    0);
> > > +}
> > > +
> > >  static void sun8i_mixer_commit(struct sunxi_engine *engine)
> > >  {
> > >         DRM_DEBUG_DRIVER("Committing changes\n");
> > > @@ -299,6 +314,7 @@ static struct drm_plane **sun8i_layers_init(struct
> drm_device *drm,
> > >  }
> > >
> > >  static const struct sunxi_engine_ops sun8i_engine_ops = {
> > > +       .atomic_begin   = sun8i_atomic_begin,
> > >         .commit         = sun8i_mixer_commit,
> > >         .layers_init    = sun8i_layers_init,
> > >  };
> > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/
> sun4i/sun8i_ui_layer.c
> > > index 7845c2a53a7f..b294a882626a 100644
> > > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > @@ -24,8 +24,7 @@
> > >  #include "sun8i_ui_scaler.h"
> > >
> > >  static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int channel,
> > > -                                 int overlay, bool enable, unsigned int
> zpos,
> > > -                                 unsigned int old_zpos)
> > > +                                 int overlay, bool enable, unsigned int
> zpos)
> > >  {
> > >         u32 val, bld_base, ch_base;
> > >
> > > @@ -44,18 +43,6 @@ static void sun8i_ui_layer_enable(struct sun8i_mixer
> *mixer, int channel,
> > >                            SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base,
> overlay),
> > >                            SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
> > >
> > > -       if (!enable || zpos != old_zpos) {
> > > -               regmap_update_bits(mixer->engine.regs,
> > > -                                  SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > -
> SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> > > -                                  0);
> > > -
> > > -               regmap_update_bits(mixer->engine.regs,
> > > -                                  SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > -
> SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> > > -                                  0);
> > > -       }
> > > -
> > >         if (enable) {
> > >                 val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> > >
> > > @@ -291,31 +278,24 @@ static int sun8i_ui_layer_atomic_check(struct
> drm_plane *plane,
> > >  static void sun8i_ui_layer_atomic_disable(struct drm_plane *plane,
> > >                                           struct drm_atomic_state *state)
> > >  {
> > > -       struct drm_plane_state *old_state =
> drm_atomic_get_old_plane_state(state,
> > > -
> plane);
> > >         struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
> > > -       unsigned int old_zpos = old_state->normalized_zpos;
> > >         struct sun8i_mixer *mixer = layer->mixer;
> > >
> > > -       sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> false, 0,
> > > -                             old_zpos);
> > > +       sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> false, 0);
> > >  }
> > >
> > >  static void sun8i_ui_layer_atomic_update(struct drm_plane *plane,
> > >                                          struct drm_atomic_state *state)
> > >  {
> > > -       struct drm_plane_state *old_state =
> drm_atomic_get_old_plane_state(state,
> > > -
> plane);
> > >         struct drm_plane_state *new_state =
> drm_atomic_get_new_plane_state(state,
> > >
> plane);
> > >         struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
> > >         unsigned int zpos = new_state->normalized_zpos;
> > > -       unsigned int old_zpos = old_state->normalized_zpos;
> > >         struct sun8i_mixer *mixer = layer->mixer;
> > >
> > >         if (!new_state->visible) {
> > >                 sun8i_ui_layer_enable(mixer, layer->channel,
> > > -                                     layer->overlay, false, 0, old_zpos);
> > > +                                     layer->overlay, false, 0);
> > >                 return;
> > >         }
> > >
> > > @@ -328,7 +308,7 @@ static void sun8i_ui_layer_atomic_update(struct
> drm_plane *plane,
> > >         sun8i_ui_layer_update_buffer(mixer, layer->channel,
> > >                                      layer->overlay, plane);
> > >         sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > -                             true, zpos, old_zpos);
> > > +                             true, zpos);
> > >  }
> > >
> > >  static const struct drm_plane_helper_funcs sun8i_ui_layer_helper_funcs =
> {
> > > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/
> sun4i/sun8i_vi_layer.c
> > > index bb7c43036dfa..4653244b2fd8 100644
> > > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > @@ -18,8 +18,7 @@
> > >  #include "sun8i_vi_scaler.h"
> > >
> > >  static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel,
> > > -                                 int overlay, bool enable, unsigned int
> zpos,
> > > -                                 unsigned int old_zpos)
> > > +                                 int overlay, bool enable, unsigned int
> zpos)
> > >  {
> > >         u32 val, bld_base, ch_base;
> > >
> > > @@ -38,18 +37,6 @@ static void sun8i_vi_layer_enable(struct sun8i_mixer
> *mixer, int channel,
> > >                            SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base,
> overlay),
> > >                            SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val);
> > >
> > > -       if (!enable || zpos != old_zpos) {
> > > -               regmap_update_bits(mixer->engine.regs,
> > > -                                  SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > -
> SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> > > -                                  0);
> > > -
> > > -               regmap_update_bits(mixer->engine.regs,
> > > -                                  SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > -
> SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> > > -                                  0);
> > > -       }
> > > -
> > >         if (enable) {
> > >                 val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> > >
> > > @@ -395,31 +382,24 @@ static int sun8i_vi_layer_atomic_check(struct
> drm_plane *plane,
> > >  static void sun8i_vi_layer_atomic_disable(struct drm_plane *plane,
> > >                                           struct drm_atomic_state *state)
> > >  {
> > > -       struct drm_plane_state *old_state =
> drm_atomic_get_old_plane_state(state,
> > > -
> plane);
> > >         struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
> > > -       unsigned int old_zpos = old_state->normalized_zpos;
> > >         struct sun8i_mixer *mixer = layer->mixer;
> > >
> > > -       sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> false, 0,
> > > -                             old_zpos);
> > > +       sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> false, 0);
> > >  }
> > >
> > >  static void sun8i_vi_layer_atomic_update(struct drm_plane *plane,
> > >                                          struct drm_atomic_state *state)
> > >  {
> > > -       struct drm_plane_state *old_state =
> drm_atomic_get_old_plane_state(state,
> > > -
> plane);
> > >         struct drm_plane_state *new_state =
> drm_atomic_get_new_plane_state(state,
> > >
> plane);
> > >         struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
> > >         unsigned int zpos = new_state->normalized_zpos;
> > > -       unsigned int old_zpos = old_state->normalized_zpos;
> > >         struct sun8i_mixer *mixer = layer->mixer;
> > >
> > >         if (!new_state->visible) {
> > >                 sun8i_vi_layer_enable(mixer, layer->channel,
> > > -                                     layer->overlay, false, 0, old_zpos);
> > > +                                     layer->overlay, false, 0);
> > >                 return;
> > >         }
> > >
> > > @@ -432,7 +412,7 @@ static void sun8i_vi_layer_atomic_update(struct
> drm_plane *plane,
> > >         sun8i_vi_layer_update_buffer(mixer, layer->channel,
> > >                                      layer->overlay, plane);
> > >         sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > -                             true, zpos, old_zpos);
> > > +                             true, zpos);
> > >  }
> > >
> > >  static const struct drm_plane_helper_funcs sun8i_vi_layer_helper_funcs =
> {
> > > --
> > > 2.30.2
> > >
> >
>
>



More information about the linux-arm-kernel mailing list