[PATCH V3 0/4] arm64: add i.MX93 support

Peng Fan (OSS) peng.fan at oss.nxp.com
Fri May 6 23:53:05 PDT 2022


From: Peng Fan <peng.fan at nxp.com>

V3:
 Add a new patch patch 1 for board binding doc
 Add A-b from Rob
 Fix dtb warnings.

V2:
 Update License

Add i.MX93 dtsi and 11x11 evk board support

The required bindings and drivers has already been in tree.
There arem checkpatch error for the pin header files as other i.MX pin
pin header files.



Peng Fan (4):
  dt-bindings: arm: fsl: add imx93 11x11 evk board
  arm64: dts: freescale: Add i.MX93 dtsi support
  arm64: dts: freescale: add i.MX93 11x11 EVK basic support
  arm64: defconfig: enable i.MX93 clk & pinctrl

 .../devicetree/bindings/arm/fsl.yaml          |   5 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 132 ++++
 arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx93.dtsi      | 333 ++++++++++
 arch/arm64/configs/defconfig                  |   2 +
 6 files changed, 1096 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
 create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h
 create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi

-- 
2.25.1




More information about the linux-arm-kernel mailing list